Flush Mount Bracket (4 in Set)

Flush Mount Rooftop Tent Brackets · Set of 4 · Very Low Profile


Mounts a Bush Company rooftop tent straight onto the extruded rail of a roof rack or canopy roof, where the rails sit perpendicular to the tent's own extrusions. Each bracket fixes to the outside edge of an extruded rail beneath the tent, so the tent sits flush with very little added height.


We recommend at least three fixing points per side, so six brackets (two sets) per tent. 3mm stainless steel with a black powder-coat finish; stainless steel bolts, washers and nyloc nuts included.

Read MoreRead More
SKU:4RTFMB International Store Finder

Flush Mount Brackets: low-profile tent mounting on extruded rails

If your roof rack or canopy roof already has extruded rails running perpendicular to the extrusions under your tent, the Flush Mount Brackets let you bolt a Bush Company rooftop tent straight onto them. There are no load bars in between, so the tent sits flush and the installation stays very low.

How they fit

Each bracket attaches to the outside edge of an extruded rail beneath the tent and bolts down into the rail on the rack or canopy.

How many you need

We recommend a minimum of three fixing points on each side of a rooftop tent, so six brackets is the minimum: order two sets of four.

Where the channels cross one on top of the other instead, the Flat Plate Fitment Brackets may suit better.

As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. For other ways to mount your tent, see our rooftop tent fitment solutions.

Specifications

  • Contents: four brackets with stainless steel bolts, washers and nyloc nuts
  • Material: 3mm (0.1in) stainless steel, black powder-coat finish
  • Recommended: at least six brackets (three per side), so two sets per tent
  • Suits: Bush Company rooftop tents on extruded roof rack or canopy rails

Description

Flush Mount Brackets: low-profile tent mounting on extruded rails

If your roof rack or canopy roof already has extruded rails running perpendicular to the extrusions under your tent, the Flush Mount Brackets let you bolt a Bush Company rooftop tent straight onto them. There are no load bars in between, so the tent sits flush and the installation stays very low.

How they fit

Each bracket attaches to the outside edge of an extruded rail beneath the tent and bolts down into the rail on the rack or canopy.

How many you need

We recommend a minimum of three fixing points on each side of a rooftop tent, so six brackets is the minimum: order two sets of four.

Where the channels cross one on top of the other instead, the Flat Plate Fitment Brackets may suit better.

As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. For other ways to mount your tent, see our rooftop tent fitment solutions.

Specifications

  • Contents: four brackets with stainless steel bolts, washers and nyloc nuts
  • Material: 3mm (0.1in) stainless steel, black powder-coat finish
  • Recommended: at least six brackets (three per side), so two sets per tent
  • Suits: Bush Company rooftop tents on extruded roof rack or canopy rails

FAQS

Does The Bush Company ship internationally?

We serve customers globally, however we don't offer online purchasing on this website. For specific shipping international information, please contact us directly through our Contact Us page.

What is The Bush Company's warranty policy?

We stand behind the quality of our products. Warranty periods vary by product: for example, our awnings carry a 2-year conditional warranty and our awning wall kits 12 months. For full details, see the individual product page or visit our warranty page.

How can I find a store that carries The Bush Company's products?

You can locate authorised retailers using the Find A Store feature on our website.

Didn’t find your answer?

Don't hesitate to contact us

The Bush Chronicles

View all
  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous
Anonymous review photo
  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous
Anonymous review photo
Flush mount bracket bolted inside a roof rail channel
The Bush Company

Flush Mount Bracket (4 in Set)

$98.00

Flush Mount Brackets: low-profile tent mounting on extruded rails

If your roof rack or canopy roof already has extruded rails running perpendicular to the extrusions under your tent, the Flush Mount Brackets let you bolt a Bush Company rooftop tent straight onto them. There are no load bars in between, so the tent sits flush and the installation stays very low.

How they fit

Each bracket attaches to the outside edge of an extruded rail beneath the tent and bolts down into the rail on the rack or canopy.

How many you need

We recommend a minimum of three fixing points on each side of a rooftop tent, so six brackets is the minimum: order two sets of four.

Where the channels cross one on top of the other instead, the Flat Plate Fitment Brackets may suit better.

As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. For other ways to mount your tent, see our rooftop tent fitment solutions.

Specifications

Buy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our stockists Australia wide.

View product

  • 2-Year Warranty

    Adventure confidently.

  • Engineered to Last

    Exclusive B-Tech® Alloy Extrusion Technology

  • Made in South Africa

    Australian Owned, Tested Globally.

  • Online Support Centre

    Expert Help and Advice.