LIGHTWEIGHT AND LOW PROFILE DESIGN

1 36

LX27 Gen 2 Lightweight Rooftop Tent

$6,750.00

LX27 Gen 2 Lightweight Rooftop Tent – Rugged. Low Profile. Adventure-Ready.

The LX27 Gen 2 is The Bush Company’s lightest clamshell rooftop tent, weighing just 81kg with a slim 176mm closed height—perfect for touring rigs and garage clearance. Set up in under 60 seconds with a gas-strut-assisted clamshell design and store bedding inside for fast pack-downs.

Built with a seam-welded aluminium frame and dual-layer 260gsm ripstop canvas, it’s made for harsh conditions. Enjoy full internal height (1.6m), a 70mm dual layer foam mattress, integrated 12V electrics (USB A & C, 12V sockets, LED tri-colour light strips), and roof load capacity of 100kg (closed) for solar or gear.

Designed for 4WDs, utes, and campers—engineered to explore.

Read MoreRead More
SKU:4RTCLX27G2 International Store Finder

LX27 Gen 2 Lightweight Rooftop Tent – Tough. Light. Built for Adventure.

Discover the perfect balance of rugged durability, lightweight design, and effortless setup with The Bush Company’s LX27 Gen 2 Lightweight Rooftop Tent. Engineered for 4WD touring, overlanding, and remote camping, the LX27 delivers premium performance without compromise.

Built for Fast Setup. Ready for Long Journeys.

When seconds count, the LX27 Gen 2 delivers. With its gas-strut-assisted clamshell mechanism, you can deploy your rooftop tent in under 60 seconds. Whether you’re setting up at a windy outback stop or packing down on a coastal track, the LX27 Gen 2 keeps you moving.

  • Setup Time: <60 seconds
  • Access: Rear and side entry points
  • Convenience: Store bedding inside with 70mm internal clearance when closed

Lightweight Frame. Full-Sized Comfort.

Weighing just 81kg, the LX27 Gen 2 is the lightest hardshell tent in The Bush Company’s lineup. Its ultra-low 176mm closed height makes it garage-friendly and aerodynamic. Despite its slim build, it opens to a spacious 1.6m internal height — enough room to sit upright and relax after a day on the tracks.

  • Weight: 81kg
  • Closed Height: 176mm
  • Internal Height: 1.6m

Durability Meets Innovation.

Built for the Australian outback, the LX27 Gen 2 features a B-Tech™ extruded aluminium frame with fully welded corners and a dual-layer 260gsm acrylic-infused ripstop canvas. This setup resists mould, mildew, UV damage and dust, keeping you protected from the harshest elements.

  • Frame: Seam-welded B-Tech™ aluminium
  • Canvas: South African-made, dual-layer ripstop 260gsm
  • Weatherproofing: Automotive-grade seals and heavy-duty rainfly

Comfort You Can Count On.

Sleep easy with the LX27 Gen 2’s premium mattress — a dual-layer 70mm thick system combining 30mm memory foam and 40mm super high-density foam, with a marine carpet underlay. Combined with excellent ventilation it offers unmatched liveability for remote touring.

  • Mattress: 70mm dual layer foam (removable cover)
  • Ventilation: Mesh-covered airflow vent, 3 doors/windows
  • Storage: Roof pockets, side pouches, water bottle holders

Access, Ventilation & Storage.

The LX27 Gen 2’ can be accessed via the large doors/windows at the side and rear. All access points have inner and outer canvas zipped doors and an premium quality midge mesh.  There is also the mesh covered airflow vent above the rear door for when you have to seal up all the doors. For storage there are large side pouched on each side of the tent and mesh water bottle holders by the rear entrance, plus the roof storage pockets now have a clear panel 'tablet' holder for iPads etc.

  • Access through large doors/windows at side and rear
  • Ventilation: Mesh-covered airflow vent, 3 doors/windows and roof vent.
  • Storage: Roof pockets, Tablet Holder, side pouches, water bottle holders

Integrated Power for Off-Grid Living.

The LX27 Gen 2 includes an integrated 12V system with dual USB-A and USB C ports,  and two 12V sockets. Power for the tent can be done either via an external Anderson plug or the unique internal power input socket inside the tent.

  • Power Outlets: Dual 12V, two USB-A and two USB-C outlets
  • External Power Input: 50A Anderson connection underneath tent
  • Internal Power Input: 20AMP WAECO power input socket.

Let There Be Light.

The LX27 Gen 2 is fully pre-wired with quality diffused Tri-Colour dimmable LED light strips at the head and foot of the tent.  The main control panel is located at the foot end of the tent, with additional independent switches at the entrance.

  • Dual Tri-Colour LED Light Strips
  • Fully dimmable for mood lighting
  • Independent light switches at entrance of the tent.

Mount More. Do More.

The LX27 Gen 2’s reinforced roof supports 100kg closed and 35kg when open. Integrated extruded Ezi-Slot channels in the roof and sides let you mount solar panels, recovery boards, or load bars for added versatility.

Specifications

  • External Dimensions: 2.25m (L) x 1.39m (W) x 0.176m (H)
  • Mattress Size: 2.03m (L) x 1.29m (W) x 70mm (H)
  • Weight: 81Kg (excl. ladder and optional longitudinal rails)
  • Canvas: 260gsm dual-layer poly-cotton ripstop
  • Power Ports: Dual USB-A, Dual USB-C, Two 12V sockets
  • Power Input: external Anderson Plug, internal 20Amp WAECO socket
  • Warranty: 2-year manufacturer warranty

Why Choose the LX27?

Whether you’re chasing horizons in the High Country or exploring coastal dunes, the LX27 Gen 2 Lightweight Rooftop Tent delivers durability, comfort, and unmatched ease of use. It’s the lightweight, low-profile solution trusted by serious tourers and everyday explorers alike.

  • Lightweight at 81kg
  • Store bedding inside when packed
  • 1.6m internal height for full liveability
  • Integrated electrical & lighting system
  • Suits most vehicles and garages
  • Premium materials made to endure the wild

Australian-designed. Overland-tested. Built for the bush.

Description

LX27 Gen 2 Lightweight Rooftop Tent – Tough. Light. Built for Adventure.

Discover the perfect balance of rugged durability, lightweight design, and effortless setup with The Bush Company’s LX27 Gen 2 Lightweight Rooftop Tent. Engineered for 4WD touring, overlanding, and remote camping, the LX27 delivers premium performance without compromise.

Built for Fast Setup. Ready for Long Journeys.

When seconds count, the LX27 Gen 2 delivers. With its gas-strut-assisted clamshell mechanism, you can deploy your rooftop tent in under 60 seconds. Whether you’re setting up at a windy outback stop or packing down on a coastal track, the LX27 Gen 2 keeps you moving.

  • Setup Time: <60 seconds
  • Access: Rear and side entry points
  • Convenience: Store bedding inside with 70mm internal clearance when closed

Lightweight Frame. Full-Sized Comfort.

Weighing just 81kg, the LX27 Gen 2 is the lightest hardshell tent in The Bush Company’s lineup. Its ultra-low 176mm closed height makes it garage-friendly and aerodynamic. Despite its slim build, it opens to a spacious 1.6m internal height — enough room to sit upright and relax after a day on the tracks.

  • Weight: 81kg
  • Closed Height: 176mm
  • Internal Height: 1.6m

Durability Meets Innovation.

Built for the Australian outback, the LX27 Gen 2 features a B-Tech™ extruded aluminium frame with fully welded corners and a dual-layer 260gsm acrylic-infused ripstop canvas. This setup resists mould, mildew, UV damage and dust, keeping you protected from the harshest elements.

  • Frame: Seam-welded B-Tech™ aluminium
  • Canvas: South African-made, dual-layer ripstop 260gsm
  • Weatherproofing: Automotive-grade seals and heavy-duty rainfly

Comfort You Can Count On.

Sleep easy with the LX27 Gen 2’s premium mattress — a dual-layer 70mm thick system combining 30mm memory foam and 40mm super high-density foam, with a marine carpet underlay. Combined with excellent ventilation it offers unmatched liveability for remote touring.

  • Mattress: 70mm dual layer foam (removable cover)
  • Ventilation: Mesh-covered airflow vent, 3 doors/windows
  • Storage: Roof pockets, side pouches, water bottle holders

Access, Ventilation & Storage.

The LX27 Gen 2’ can be accessed via the large doors/windows at the side and rear. All access points have inner and outer canvas zipped doors and an premium quality midge mesh.  There is also the mesh covered airflow vent above the rear door for when you have to seal up all the doors. For storage there are large side pouched on each side of the tent and mesh water bottle holders by the rear entrance, plus the roof storage pockets now have a clear panel 'tablet' holder for iPads etc.

  • Access through large doors/windows at side and rear
  • Ventilation: Mesh-covered airflow vent, 3 doors/windows and roof vent.
  • Storage: Roof pockets, Tablet Holder, side pouches, water bottle holders

Integrated Power for Off-Grid Living.

The LX27 Gen 2 includes an integrated 12V system with dual USB-A and USB C ports,  and two 12V sockets. Power for the tent can be done either via an external Anderson plug or the unique internal power input socket inside the tent.

  • Power Outlets: Dual 12V, two USB-A and two USB-C outlets
  • External Power Input: 50A Anderson connection underneath tent
  • Internal Power Input: 20AMP WAECO power input socket.

Let There Be Light.

The LX27 Gen 2 is fully pre-wired with quality diffused Tri-Colour dimmable LED light strips at the head and foot of the tent.  The main control panel is located at the foot end of the tent, with additional independent switches at the entrance.

  • Dual Tri-Colour LED Light Strips
  • Fully dimmable for mood lighting
  • Independent light switches at entrance of the tent.

Mount More. Do More.

The LX27 Gen 2’s reinforced roof supports 100kg closed and 35kg when open. Integrated extruded Ezi-Slot channels in the roof and sides let you mount solar panels, recovery boards, or load bars for added versatility.

Specifications

  • External Dimensions: 2.25m (L) x 1.39m (W) x 0.176m (H)
  • Mattress Size: 2.03m (L) x 1.29m (W) x 70mm (H)
  • Weight: 81Kg (excl. ladder and optional longitudinal rails)
  • Canvas: 260gsm dual-layer poly-cotton ripstop
  • Power Ports: Dual USB-A, Dual USB-C, Two 12V sockets
  • Power Input: external Anderson Plug, internal 20Amp WAECO socket
  • Warranty: 2-year manufacturer warranty

Why Choose the LX27?

Whether you’re chasing horizons in the High Country or exploring coastal dunes, the LX27 Gen 2 Lightweight Rooftop Tent delivers durability, comfort, and unmatched ease of use. It’s the lightweight, low-profile solution trusted by serious tourers and everyday explorers alike.

  • Lightweight at 81kg
  • Store bedding inside when packed
  • 1.6m internal height for full liveability
  • Integrated electrical & lighting system
  • Suits most vehicles and garages
  • Premium materials made to endure the wild

Australian-designed. Overland-tested. Built for the bush.

Installation

A copy of the fitting instructions is available for download here.

The Bush Company or one of our stockists can assemble and install your rooftop tent. 

If you choose to install the rooftop tent yourself please make sure that you have done the due diligence on your intended installation to ensure that it does not create any safety issues. Please ensure that you follow standard safety precautions when undertaking the installation.

If you are installing the rooftop tent yourself, please watch our  Pre-Install Assembly video to get some important tips.

Care & Maintenance

Rooftop Tent Care and Maintenance

We recommend that new rooftop tents are opened and the canvas wet down on the outside before first use. Do not spray water onto the air vent above the rear door. This will ensure that your rooftop tent performs flawlessly in wet weather by allowing the poly/cotton core spun thread and canvas to swell ensuring the take up of any potential leaks in the stitching.

Regular Maintenance

  • Lubricate the tent seal with silicon gel and clean seal mating surface thoroughly to prevent the seal from 'sticking' to the tent frame.
  • Check for any signs of wear and tear, such as cracks, tears, or loose stitching in the tent fabric, midge mesh and seals.
  • Inspect zippers, gas struts, hinges for smooth operation and lubrication.

Cleaning Canvas:

  • Do not use soap or detergents on the canvas.
  • Do not store the product if wet, allow drying first.
  • To clean use a soft brush and cold water.
  • Do not expose to petrol, oils or harsh chemicals.

Cleaning Mould From Canvas:

The canvas of The Bush Company Tents is treated during manufacturing with a mould and mildew inhibitor, but in the event that your tent canvas develop mould please followw the steps below to remove it:

  • Allow mould to dry
  • Remove surface mould off with a stiff bristle brush
  • Vacuum the area
  • Treat area with Oil of Clove spray (diluted spray can be purchased or can be mixed using a few drops of oil into a spray bottle of water)

Condensation:

Condensation is a natural occurrence, the combination of cold nights and warm days can create a lovely environment for mould and mildew to develop. This is not because of bad seals but from temperature changes combined with humidity creating condensation inside the tent.

When in use, reduce condensation build-up, keep some of the windows open to increase airflow.

After your trip, make sure you allow the tent to fully dry inside and out. If you are not using your rooftop tent for an extended time (more than 10 days) open the tent regularly to air it out, and possibly remove the mattress and store it separately until your next trip.

Tent Frame Care

To ensure the longevity and aesthetic appeal of your powder coated surfaces, regular care and maintenance are essential. Factors such as pollution, dirt, salt, and exposure to strong ultraviolet (UV) light can gradually impact the quality and integrity of the coating over time.

Cleaning Recommendations:

  • Remove Loose Dirt: Begin by gently removing any loose dirt or deposits from the surface using a wet sponge. This initial step helps prevent scratching during the cleaning process.
  • Use Mild Cleaning Solutions: for general cleaning, utilize a non-abrasive brush or cloth along with a ph-neutral car wash product such as Salt Shift 4x4 & Caravan Wash or Bowden's Dirty Times 4WD Wash to keep the surface of the tent if good condition. These solutions effectively remove dust, salt, and other deposits without causing damage to the powder coating.
  • Rinse Thoroughly: after applying the cleaning solution, rinse the surface thoroughly with clean water. This step ensures the removal of any residue or cleaning agents that may be left behind. 

Powder Coat Treatment

We recommend that at a minimum of once every six months or if your powder coat surface is fading, the powder coat should be treated with a dedicated powder coat restorer such as Rig Revive or Ezy Renew. Follow the application directions on the product you select.

Recommended Cleaning Frequency:

  • For general use we recommend cleaning and powder coat treatment every six months as a good practice to maintain appearance and coating integrity.
  • If your tent is used regularly for beach camping we recommend cleaning the tent after each trip as you should your vehicle.
  • If your tent is located in an area with high exposure to pollutants or intense UV radiation from being outside all the time, it should be cleaned and the powder coat treated approximately every three months.

 Important Considerations

Avoid Harsh Detergents: Steer clear of detergents that recommend the use of gloves when handling, as they are usually harsh and may be unsuitable for cleaning powder coatings. Instead, opt for a good quality car wash and wax or a similar mild cleaning solution.

Caution with Solvents

While certain solvents are recommended for removing sealants or other building residues, they can potentially harm the extended life of the powder coated surface. To minimise risks, it is best to avoid using solvents unless absolutely necessary. If paint splashes, sealants, or other residues need to be removed, you can safely use methylated spirits, turpentine, or white spirits. However, be cautious as their use may still have long-term effects that may not be immediately visible and could take up to twelve months to appear.

Powder Coat Paint Repair

If the powder coat surface of your tent is damaged and needs to be touched up we recommend the following:

 

Stacked with features

COMPACT & COMFY

The LX27 is designed to be a low profile, compact touring tent. At just 172mm high and 73Kg it still offers superior comfort. The 3 stage sleeping solution combines 3 types of foam to offer a comfortable nights sleep, anywhere you choose to adventure. Even with its slimline design, you can still store basic bedding in the tent and latch it closed with ease. With 1.6m of headroom when open, there's plenty of room to sit up and move around inside.

ROOM ON TOP, FOR MORE ADVENTURES

Designed by tourers for tourers, the LX27 Rooftop Tent offers unmatched space and versatility so that your journey is never limited. The LX27 has an internally reinforced roof has a 100kg load rating when closed, allowing you to carry extra gear like solar panels or surfboards, it will even open with 35Kg on the roof. The Ezi-Slot system offers extra mounting options, allowing you to customise your rig, with a range of accessories.

BUY ONCE, BUY RIGHT

Tour with confidence knowing you have the most durable Roof Top Tent on the market. Engineered for the toughest adventures, the LX27 frame incorporates our unique B-Tech™ Alloy Extrusion, making it lighter and stronger with reinforced, welded corners for unmatched durability. The a large rainfly and the dual layered canvas will help you endure any weather.

EASY TO SET UP AND PACK UP

If you’re not set up and relaxing by the campfire in less than 5 minutes, we’ve done something wrong. The LX27 Roof Top Tent sets up in seconds with its gas strut-assisted opening lid and lightweight B-Tech™ Alloy Extruded frame, making packing up and down seamless. The innovative design allows you to leave your bedding inside the tent when packing up, saving time and space to keep your 4WD free for other essentials

THE PIONEER’S CHOICE

Built for those who don’t follow the map but write it, the Bush Company’s Rooftop Tents are the gear serious pioneers rely on. Made in South Africa, they’ve earned a reputation as the real deal—proven in the harshest conditions and respected by overlanders worldwide. This is not just a tent; it’s a long-term investment in every adventure you'll ever take.

LX27 Gen 2 Lightweight Rooftop Tent VIDEOS

View all

FAQS

How much does the LX27 Clamshell Rooftop Tent Weigh?

The LX27 Clamshell Rooftop Tent weighs approximately 73kgs, excluding the telescopic ladder.

What are the dimensions of the LX27 Rooftop Tent?

The LX27 Rooftop Tent, when open has an exterior height of 1750mm. The interior height is 1700mm.

When closed, the LX27 Rooftop tent is 172mm, not including roof rack height.

The width and length are 2250mm (L) and 1350mm (W).

How do I install/mount the LX27 Clamshell Rooftop Tent

Whilst you can mount a rooftop tent yourself, we often recommend working with our aftercare team or one of our recommended suppliers to ensure your rooftop tent is safely installed.  

If you do wish to install your own Rooftop Tent, follow the instructions here and please watch our Pre-Install Assembly video.

Didn’t find your answer?

Don't hesitate to contact us

The Bush Company

LX27 Gen 2 Lightweight Rooftop Tent

$6,750.00

LX27 Gen 2 Lightweight Rooftop Tent – Tough. Light. Built for Adventure.

Discover the perfect balance of rugged durability, lightweight design, and effortless setup with The Bush Company’s LX27 Gen 2 Lightweight Rooftop Tent. Engineered for 4WD touring, overlanding, and remote camping, the LX27 delivers premium performance without compromise.

Built for Fast Setup. Ready for Long Journeys.

When seconds count, the LX27 Gen 2 delivers. With its gas-strut-assisted clamshell mechanism, you can deploy your rooftop tent in under 60 seconds. Whether you’re setting up at a windy outback stop or packing down on a coastal track, the LX27 Gen 2 keeps you moving.

Lightweight Frame. Full-Sized Comfort.

Weighing just 81kg, the LX27 Gen 2 is the lightest hardshell tent in The Bush Company’s lineup. Its ultra-low 176mm closed height makes it garage-friendly and aerodynamic. Despite its slim build, it opens to a spacious 1.6m internal height — enough room to sit upright and relax after a day on the tracks.

Durability Meets Innovation.

Built for the Australian outback, the LX27 Gen 2 features a B-Tech™ extruded aluminium frame with fully welded corners and a dual-layer 260gsm acrylic-infused ripstop canvas. This setup resists mould, mildew, UV damage and dust, keeping you protected from the harshest elements.

Comfort You Can Count On.

Sleep easy with the LX27 Gen 2’s premium mattress — a dual-layer 70mm thick system combining 30mm memory foam and 40mm super high-density foam, with a marine carpet underlay. Combined with excellent ventilation it offers unmatched liveability for remote touring.

Access, Ventilation & Storage.

The LX27 Gen 2’ can be accessed via the large doors/windows at the side and rear. All access points have inner and outer canvas zipped doors and an premium quality midge mesh.  There is also the mesh covered airflow vent above the rear door for when you have to seal up all the doors. For storage there are large side pouched on each side of the tent and mesh water bottle holders by the rear entrance, plus the roof storage pockets now have a clear panel 'tablet' holder for iPads etc.

  • Access through large doors/windows at side and rear
  • Ventilation: Mesh-covered airflow vent, 3 doors/windows and roof vent.
  • Storage: Roof pockets, Tablet Holder, side pouches, water bottle holders

Integrated Power for Off-Grid Living.

The LX27 Gen 2 includes an integrated 12V system with dual USB-A and USB C ports,  and two 12V sockets. Power for the tent can be done either via an external Anderson plug or the unique internal power input socket inside the tent.

Let There Be Light.

The LX27 Gen 2 is fully pre-wired with quality diffused Tri-Colour dimmable LED light strips at the head and foot of the tent.  The main control panel is located at the foot end of the tent, with additional independent switches at the entrance.

Mount More. Do More.

The LX27 Gen 2’s reinforced roof supports 100kg closed and 35kg when open. Integrated extruded Ezi-Slot channels in the roof and sides let you mount solar panels, recovery boards, or load bars for added versatility.

Specifications

Why Choose the LX27?

Whether you’re chasing horizons in the High Country or exploring coastal dunes, the LX27 Gen 2 Lightweight Rooftop Tent delivers durability, comfort, and unmatched ease of use. It’s the lightweight, low-profile solution trusted by serious tourers and everyday explorers alike.

Australian-designed. Overland-tested. Built for the bush.

View product

  • 2-Year Warranty

    Adventure confidently.

  • Engineered to Last

    Exclusive B-Tech™ Alloy Extrusion Technology

  • Made in South Africa

    Australian Owned, Tested Globally.

  • Online Support Centre

    Expert Help and Advice.