UNMATCHED TOUGHNESS, MAXIMUM COVERAGE.

270 XT MAX Awning Mk2

Freestanding 270 Degree 4WD Awning for Overlanding

The 270 XT MAX Awning Mk2 is a freestanding 270-degree awning designed for 4WD vehicles and overlanding setups. It delivers 12 square metres of UV- and water-resistant shade using a 315gsm ripstop polycotton canvas. The frame is built with B-Tech™ Alloy truss arms and stainless steel hinges, offering strength and corrosion resistance for remote travel. This awning features a fast, pole-free deployment system and includes a built-in Velcro loop strip for optional wall kit integration. With a 2.3 metre packed length and three adjustable L-brackets included, it fits most roof racks and supports modular expansion for full weather protection. Designed to perform in harsh environments, the 270 XT MAX Awning Mk2 is suitable for serious touring, off-road camping, and extended outdoor use.

Read MoreRead More
SKU:4AXTML International Store Finder

270 XT MAX Awning Mk2 | Freestanding 4WD Awning with 270° Coverage

The 270 XT MAX Awning Mk2 by The Bush Company is a premium freestanding awning engineered for serious off-road travellers and overlanders. Built to withstand extreme Australian conditions, this awning delivers 270 degrees of uninterrupted shade with no upright poles required during calm setups. With 12m² of UV- and water-resistant coverage and reinforced with B-Tech™ Alloy construction, it offers rapid deployment, outstanding wind resistance, and seamless modular compatibility with Bush Company tents and wall kits.

Rapid Freestanding Deployment in Under 60 Seconds

The 270 XT MAX Mk2 is designed for fast solo setup thanks to it truss arm system. Its pole-free architecture allows you to deploy the awning in less than a minute without needing ground supports in mild conditions. This freestanding capability is essential for remote touring, uneven terrain, or quick roadside stops, offering both efficiency and stability for mobile campsites.

B-Tech™ Alloy Frame with Military-Grade Durability

The frame incorporates B-Tech™ Alloy arms and stainless steel hinges, delivering superior torsional strength and corrosion resistance. This heavy-duty design withstands wind gusts up to 50 km/h when pegged and guyed correctly. Combined with the 315gsm polycotton ripstop canvas, the awning resists UV damage and wet-weather wear, making it ideal for prolonged exposure in outback, coastal, or alpine conditions.

12m² of Wraparound Shade Coverage

With a full 270° reach and 12 square metres of coverage, the awning shelters rooftop tents, camp kitchens, and vehicle workspaces with ease. Whether used for shade, rain protection, or gear storage, its extended footprint provides the functionality and comfort required for extended expeditions and off-grid travel.

Modular Wall Integration with Secure Velcro System

A 50mm internal Velcro loop strip allows for seamless connection of optional canvas or mesh wall kits, enabling full enclosure setups for privacy and additional shelter. The modularity of the system supports multiple configurations—build shaded side rooms, create windbreaks, or fully enclose your awning for complete all-weather protection.

Roof Rack Compatibility and Mounting Flexibility

Supplied with three heavy-duty adjustable L-brackets, the awning mounts easily to most roof racks or load bars. A minimum of 1.9m spacing between mounts is required for secure installation. The 2.3m packed length fits standard roof profiles without overhang, while optional brackets support direct integration with Bush Company rooftop tents for a streamlined overlanding setup.

Built for Overlanding and Harsh Touring Conditions

Weighing just 33.5kg, the awning maintains strength without compromising on handling or roof load limits. From tropical humidity to red dust and high winds, every component of the 270 XT MAX Mk2 is engineered to thrive in Australia’s harshest environments. Whether you're travelling full-time or heading into remote territory, this awning provides the reliability and performance demanded by serious 4WD explorers.

Usage Guidance & Recommendations

It is recommended that the front and rear non trussed arms are secured using the included guy ropes and pegs to prevent excessive upward movement in all weather conditions.

Use guy ropes attached to 1-tonne webbing straps between the awning arms to manage water runoff and prevent pooling in heavy rain.

Avoid leaving up during snowfall to prevent canvas stretching.

Key Features

Freestanding 270° deployment—no poles required

315gsm ripstop polycotton canvas with UV and water-resistant treatment

12m² of shade coverage wrapping around the vehicle

B-Tech™ Alloy truss arms with stainless steel hinges

2.3m packed length, weighs 33.5kg

Compatible with Bush Company wall kits and rooftop tents

Includes adjustable L-brackets for secure mounting

Designed to handle wind speeds up to 50 km/h when properly secured

Ideal For:

4WD travellers, remote tourers, and overlanding crews who need a reliable, fast-deploying, freestanding awning with high wind resistance, modular wall compatibility, and durable performance in extreme environments.

Description

270 XT MAX Awning Mk2 | Freestanding 4WD Awning with 270° Coverage

The 270 XT MAX Awning Mk2 by The Bush Company is a premium freestanding awning engineered for serious off-road travellers and overlanders. Built to withstand extreme Australian conditions, this awning delivers 270 degrees of uninterrupted shade with no upright poles required during calm setups. With 12m² of UV- and water-resistant coverage and reinforced with B-Tech™ Alloy construction, it offers rapid deployment, outstanding wind resistance, and seamless modular compatibility with Bush Company tents and wall kits.

Rapid Freestanding Deployment in Under 60 Seconds

The 270 XT MAX Mk2 is designed for fast solo setup thanks to it truss arm system. Its pole-free architecture allows you to deploy the awning in less than a minute without needing ground supports in mild conditions. This freestanding capability is essential for remote touring, uneven terrain, or quick roadside stops, offering both efficiency and stability for mobile campsites.

B-Tech™ Alloy Frame with Military-Grade Durability

The frame incorporates B-Tech™ Alloy arms and stainless steel hinges, delivering superior torsional strength and corrosion resistance. This heavy-duty design withstands wind gusts up to 50 km/h when pegged and guyed correctly. Combined with the 315gsm polycotton ripstop canvas, the awning resists UV damage and wet-weather wear, making it ideal for prolonged exposure in outback, coastal, or alpine conditions.

12m² of Wraparound Shade Coverage

With a full 270° reach and 12 square metres of coverage, the awning shelters rooftop tents, camp kitchens, and vehicle workspaces with ease. Whether used for shade, rain protection, or gear storage, its extended footprint provides the functionality and comfort required for extended expeditions and off-grid travel.

Modular Wall Integration with Secure Velcro System

A 50mm internal Velcro loop strip allows for seamless connection of optional canvas or mesh wall kits, enabling full enclosure setups for privacy and additional shelter. The modularity of the system supports multiple configurations—build shaded side rooms, create windbreaks, or fully enclose your awning for complete all-weather protection.

Roof Rack Compatibility and Mounting Flexibility

Supplied with three heavy-duty adjustable L-brackets, the awning mounts easily to most roof racks or load bars. A minimum of 1.9m spacing between mounts is required for secure installation. The 2.3m packed length fits standard roof profiles without overhang, while optional brackets support direct integration with Bush Company rooftop tents for a streamlined overlanding setup.

Built for Overlanding and Harsh Touring Conditions

Weighing just 33.5kg, the awning maintains strength without compromising on handling or roof load limits. From tropical humidity to red dust and high winds, every component of the 270 XT MAX Mk2 is engineered to thrive in Australia’s harshest environments. Whether you're travelling full-time or heading into remote territory, this awning provides the reliability and performance demanded by serious 4WD explorers.

Usage Guidance & Recommendations

It is recommended that the front and rear non trussed arms are secured using the included guy ropes and pegs to prevent excessive upward movement in all weather conditions.

Use guy ropes attached to 1-tonne webbing straps between the awning arms to manage water runoff and prevent pooling in heavy rain.

Avoid leaving up during snowfall to prevent canvas stretching.

Key Features

Freestanding 270° deployment—no poles required

315gsm ripstop polycotton canvas with UV and water-resistant treatment

12m² of shade coverage wrapping around the vehicle

B-Tech™ Alloy truss arms with stainless steel hinges

2.3m packed length, weighs 33.5kg

Compatible with Bush Company wall kits and rooftop tents

Includes adjustable L-brackets for secure mounting

Designed to handle wind speeds up to 50 km/h when properly secured

Ideal For:

4WD travellers, remote tourers, and overlanding crews who need a reliable, fast-deploying, freestanding awning with high wind resistance, modular wall compatibility, and durable performance in extreme environments.

Specifications

  • Mount Type: Left or Right Side Available
  • Fabric Material: 310gsm Ripstop Polycotton Canvas: 11.3 oz
  • Frame Material: Extruded Aluminium Alloy
  • Awning Bag Material: 450gsm PVC Tonneau 
  • External Dimensions (when open): 6067mm L x 3100mm W
  • Packed Dimension: 2300mm L x 180mm H
  • Coverage: 12.2 sqm, 270 degrees
  • Weight: 33.5 kg
  • Warranty: 2 Years Conditional

Vehicle Compatability

If mounting to a roof rack then the rack will typically need to be a minimum 1.9m / 6’3″ in length. We recommend placing a third bracket in the middle of the awning to provide additional support.

The 270 XT MAX Awning Mk2 is supplied with 3 Heavy DutyAdjustable L Brackets. One fitment bracket must be attached to the stainless steel headstock at each end, a minimum distance of 1800 mm.

Care & Maintenance

Using & Caring For Your Awning

Before Use:

We recommend that new awnings are thoroughly wet down before first use. This will ensure that your awning performs well in wet weather by allowing the poly/cotton core spun thread and canvas to swell ensuring the takeup of any potential leaks in the stitching.

Deploying & Packing Away:

  • When unzipping the awning, make sure the zippers are right to the top of the bag at each end and that the bottom corners of the bag are not caught on the awning frame.
  • When deploying your awning if the canvas seems excessively tight, STOP and check that the canvas is not caught on the hinge mechanism and that it has not slid too far one way in the sail-track on the awning frame.
  • When packing the awning away, ensure that the canvas is not pinched between the awning arms especially close to the hinge mechanism.

Cleaning Canvas & PVC Bag:

  • To clean canvas use a soft brush and cold water.
  • Do not expose to petrol, oils or harsh chemicals.
  • The PVC bag van be cleaned with standard car wash cleaning solution.

Cleaning mould:

Your awning canvas is pre-treated with mould and mildew resistance, but if mould/mildew does occur please follow these steps:

  • Allow mould to dry.
  • Remove surface mould with stiff bristle brush.
  • Vacuum the area.
  • Treat area with Oil of Clove spray (diluted spray can be purchased or can be mixed using a few drops of oil into a spray bottle of water).

Regular Maintenance & Checks:

Like any accessory used in extreme conditions regular maintenance is required to ensure the longevity of your awning, including:

  • Inspect awning hinges to identify any bolts that may need re-tightening.
  • Ensure that awning canvas is correctly located in the sail-rack on the backing frame to eliminate excessive tension on the canvas.
  • Inspect the attachment of the canvas to the ends of the awning arms.
  • Inspect canvas to identify any wear marks caused by incorrect packing of the canvas.

Stacked with features

RELAX IN 60 SECONDS

Set-up & pack down in under 60 seconds, no poles or guy ropes to deal with. Our tough stainless steel hinges make quick work of set-up, so you can kick back faster.

270° FREESTANDING COVERAGE

One of the biggest freestanding shades in the game, offering 270° of relentless coverage—perfect for spreading out or sharing the space with mates. The forward-folding arm ensures maximum shade where you need it most, making it the ultimate companion for any adventure.

ONE SEAM TO KEEP YOU DRY

Our single-seam solution means everyone stays dry and comfortable, with less chance of leaks. Manufactured in South Africa, our unique design method maximises canvas width and minimises seams, significantly reducing the potential for leakage.

BUILT TOUGH

Engineered for the extreme: our cutting-edge B-Tech™ Alloy frame & extrusions are built tough, providing ultimate strength and durability. Invest once, and own the most resilient awning out there.

WITHSTAND WILD WEATHER

Built to take on extreme conditions, our awning stands tall on its own—even when the weather turns wild. But for those extra windy days, we’ll keep you grounded with included guy ropes and pegs. Trust us—your car’s more likely to lift off than this beast.

NEXT LEVEL ACCESSORIES

Create your own space with privacy and protection from the elements thanks to the freestanding awning wall-kit accessories. Detachable walls are easy to use and turn your outdoor space into a cozy living room with a stunning view.

Not sure which one is right for you?

Compare Our Freestanding Awnings

A table comparing the facets of 3 products
Facet
270 XT MAX Awning Mk2 - The Bush Company
270 XT MAX Awning Mk2
View
270 XT Awning Mk2 - The Bush Company
270 XT Awning Mk2
View
180 XT MAX Awning - The Bush Company
180 XT MAX Awning
View
Product variants
Product variants270 XT MAX Awning Options
  • Left Hand Side FItment,
  • Right Hand Side Fitment
270 XT Awning Option
  • Left Hand Side Fitment,
  • Right Hand Side Fitment
-
Weight
Weight
33.5Kg
27.8Kg
26.5Kg
Awning Coverage
Awning Coverage
12m2
8m2
8m2
Hinge Points
Hinge Points
2
1
2
Minimum Mounting Distance
Minimum Mounting Distance
1.9m
1.4m
1.9m

FAQS

What are the dimensions?

When packed away, the awning dimensions are approximately 2300mm L x 180mm wide. When open the awning is 12m2, with dimensions of 6067mm L x 3100mm W.

See dimension diagrams here:

Is this a freestanding awning?

Yes the 270 XT MAX is a freestanding awning, which means other than being mounted on your car, no additional poles or support items are required to use this awning.

How heavy is the awning?

This awning weighs 33.5kg

Can I install it myself?

Yes The 270XT MAX Freestanding awning can be installed at home. Due to its weight, you may require an additional person to help with lifting and bolting into place.

Does this awning need poles?

No - In general you don't require poles for the 270XT MAX awning. We do however recommend using the supplied poles with the awning walls (poles supplied with awning wall purchase)

What roof racks is it compatible with?

If you're mounting it to your roof rack, you'll need at least 1.9m (6'3") in length. For extra support, we suggest adding a third bracket in the centre of the awning.

How do I install it? (video)

A copy of the fitting instructions for The Bush Company awnings is available for download here


The Bush Company or one of our stockists can install your awning, but if you choose to install the awning yourself please make sure that you have done the due diligence to ensure that it does not create any safety issues. Please also ensure you follow all standard safety precautions when undertaking the install.


You may find it useful to watch the following videos:

Didn’t find your answer?

Don't hesitate to contact us

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Darcy Dridan
Unreal

Absolutely unreal. Though price may deter some, this is the awning you will NOT upgrade from. Massive coverage, solid design and construction and flexible mounting options with the provided brackets.

L
Lachlan
Best awning I’ve ever own

Great would awning I own two now one my camper and wagon best awning I’ve ever own

M
Mark
Amazing product

Amazing product, fast delivery. Great customer service.

Best awning available, don't waste your time going else where.

270 XT MAX Awning Mk2 - The Bush Company
The Bush Company

270 XT MAX Awning Mk2

$2,850.00

270 XT MAX Awning Mk2 | Freestanding 4WD Awning with 270° Coverage

The 270 XT MAX Awning Mk2 by The Bush Company is a premium freestanding awning engineered for serious off-road travellers and overlanders. Built to withstand extreme Australian conditions, this awning delivers 270 degrees of uninterrupted shade with no upright poles required during calm setups. With 12m² of UV- and water-resistant coverage and reinforced with B-Tech™ Alloy construction, it offers rapid deployment, outstanding wind resistance, and seamless modular compatibility with Bush Company tents and wall kits.


Rapid Freestanding Deployment in Under 60 Seconds

The 270 XT MAX Mk2 is designed for fast solo setup thanks to it truss arm system. Its pole-free architecture allows you to deploy the awning in less than a minute without needing ground supports in mild conditions. This freestanding capability is essential for remote touring, uneven terrain, or quick roadside stops, offering both efficiency and stability for mobile campsites.


B-Tech™ Alloy Frame with Military-Grade Durability

The frame incorporates B-Tech™ Alloy arms and stainless steel hinges, delivering superior torsional strength and corrosion resistance. This heavy-duty design withstands wind gusts up to 50 km/h when pegged and guyed correctly. Combined with the 315gsm polycotton ripstop canvas, the awning resists UV damage and wet-weather wear, making it ideal for prolonged exposure in outback, coastal, or alpine conditions.


12m² of Wraparound Shade Coverage

With a full 270° reach and 12 square metres of coverage, the awning shelters rooftop tents, camp kitchens, and vehicle workspaces with ease. Whether used for shade, rain protection, or gear storage, its extended footprint provides the functionality and comfort required for extended expeditions and off-grid travel.


Modular Wall Integration with Secure Velcro System

A 50mm internal Velcro loop strip allows for seamless connection of optional canvas or mesh wall kits, enabling full enclosure setups for privacy and additional shelter. The modularity of the system supports multiple configurations—build shaded side rooms, create windbreaks, or fully enclose your awning for complete all-weather protection.


Roof Rack Compatibility and Mounting Flexibility

Supplied with three heavy-duty adjustable L-brackets, the awning mounts easily to most roof racks or load bars. A minimum of 1.9m spacing between mounts is required for secure installation. The 2.3m packed length fits standard roof profiles without overhang, while optional brackets support direct integration with Bush Company rooftop tents for a streamlined overlanding setup.


Built for Overlanding and Harsh Touring Conditions

Weighing just 33.5kg, the awning maintains strength without compromising on handling or roof load limits. From tropical humidity to red dust and high winds, every component of the 270 XT MAX Mk2 is engineered to thrive in Australia’s harshest environments. Whether you're travelling full-time or heading into remote territory, this awning provides the reliability and performance demanded by serious 4WD explorers.

Usage Guidance & Recommendations


Key Features


Ideal For:

4WD travellers, remote tourers, and overlanding crews who need a reliable, fast-deploying, freestanding awning with high wind resistance, modular wall compatibility, and durable performance in extreme environments.

270 XT MAX Awning Options

  • Left Hand Side FItment
  • Right Hand Side Fitment
View product