Classic Series MAX Rooftop Tent

Classic Series MAX Rooftop Tent – Brand New

This is a brand new tent that is still in the original packaging.

The Classic Series MAX Clamshell Rooftop Tent was the original Bush Company double action rooftop tent.  This tent has a folded and fully welded frame with checker plate roof and floor.  Check out the video for more information.

There is no warranty on this tent.

Overview

Designed and manufactured in South Africa, the Bush Company Roof Top Tent – Classic Series MAX edition is unrivalled in its quality, simplicity and practicality. 

With a setup/pack down time of under 3 minutes and a 75mm high density foam mattress, this really is the ultimate in comfort and convenience and a superb addition to any camping/touring setup. 

Double Action Roof

The Classic Series MAX has a double action opening roof, so you have the option of either just opening the tent as a Clamshell or opening the second roof providing 141cm of headroom at the rear and 137cm at the front of the tent. The second roof can be closed easily from the inside or outside of the tent and is firmly secured when closed with catches on the sides and front. 

Ventilation and Access

In addition to the standard rear and side openings found on the Classic Series, when fully open the Classic Series MAX has an additional large opening at the front of the tent and two additional windows on the side of the canvas providing increased airflow and also visibility from the tent. 

All of the openings on the Classic Series MAX have high quality midge mesh and a canvas door that zips up from the bottom. 

Power and Lighting

There is 12V power pre-installed with the input being an anderson plug underneath the tent. For lighting there is pre-wired LED light in the roof of the tent, 

Roof Loading

There are 1.8m extruded roof rails enabling you to secure up to 200Kg on the roof of the tent in the closed position (recommended to use load bars), and even with 50Kg on the roof the mechanical gas struts will still be able to open and safely support the roof. 

Dimensions

• Length: External 2.25m / internal (mattress length) 2.15m
• Width: External 1.6m (1.68m including gas struts) / internal (mattress width)1.5 m 
• Height (exterior, closed): 31cm including roof rails and base extrusions
• Height (exterior, open): 1.43m Height (interior, open): 1.41m at rear and 1.37m at front
• Weight: Approximately 100kg (excluding telescopic ladder)

Mounting System

Four extruded rails underneath tent running crossways for easy fitment to vehicles. The extrusions are 50mm wide and are 398mm apart with the distance from the end of the tent to the first extrusion being 423mm.

Key Features

• Fast set-up and pack down time - less than 90 seconds.
• Aluminium base frame and roof frame powder coated black
• Chequer plate 1.5mm floor and roof
• Internally reinforced roof can take up to 50Kg of additional weight
• Extruded roof rails 1.8m long on both sides, suitable for M8 bolts.
• Heavy duty gas struts on both sides.
• Internal LED light (White and Yellow) and pre-installed 12V wiring using Anderson plugs underneath and inside the tent
• Heavy duty 460g ripstop, mould resistant canvas.
• Large easy set up rain fly on rear and both sides of tent.
• 75mm super high density foam mattress.
• Thermal marine carpet underneath mattress and carpeted internal roof
• Heavy duty fly screen mesh on all entry points
• Collapsible aluminium ladder with attachment points at rear and drivers side
• YKK zippers used on fly screens and canvas door openings
• Internal storage pockets on roof and also on sides.
• Telescopic ladder in seperate canvas bag, can extend up to 2.5m.

Rooftop Tent Care and Maintenance

We recommend that new rooftop tents are opened and the canvas wet down on the outside before first use. Do not spray water onto the air vent above the rear door. This will ensure that your rooftop tent performs flawlessly in wet weather by allowing the poly/cotton core spun thread and canvas to swell ensuring the take up of any potential leaks in the stitching.

Regular Maintenance

• Lubricate the tent seal with silicon gel and clean seal mating surface thoroughly to prevent the seal from 'sticking' to the tent frame.
• Check for any signs of wear and tear, such as cracks, tears, or loose stitching in the tent fabric, midge mesh and seals.
• Inspect zippers, gas struts, hinges for smooth operation and lubrication.

Cleaning Canvas:

• Do not use soap or detergents on the canvas.
• Do not store the product if wet, allow drying first.
• To clean use a soft brush and cold water.
• Do not expose to petrol, oils or harsh chemicals.

Cleaning Mould From Canvas:

The canvas of The Bush Company Tents is treated during manufacturing with a mould and mildew inhibitor, but in the event that your tent canvas develop mould please followw the steps below to remove it:

• Allow mould to dry
• Remove surface mould off with a stiff bristle brush
• Vacuum the area
• Treat area with Oil of Clove spray (diluted spray can be purchased or can be mixed using a few drops of oil into a spray bottle of water)

Condensation:

Condensation is a natural occurrence, the combination of cold nights and warm days can create a lovely environment for mould and mildew to develop. This is not because of bad seals but from temperature changes combined with humidity creating condensation inside the tent.

When in use, reduce condensation build-up, keep some of the windows open to increase airflow.

After your trip, make sure you allow the tent to fully dry inside and out. If you are not using your rooftop tent for an extended time (more than 10 days) open the tent regularly to air it out, and possibly remove the mattress and store it separately until your next trip.