
Bruder EXP-4 with TX27 MAX Rooftop Tent
Setting up the the perfect trailer solution. Putting the ultimate Bruder EXP-4 with a TX27 Max and 2 x 180XT Max Awnings
Awning To Tent Bracket 4 Piece by The Bush Company is a stainless steel mounting system designed to attach awnings to compatible rooftop tents. It features a 4-piece modular design and integrates with Ezi-Slot channels for tool-free installation. Suitable for AX27, DX27, and TX27 and TX27-MAX tents, it supports awnings up to 40kg with left- or right-side mounting options. The powder-coated finish offers corrosion and UV resistance for off-road durability.
The Awning To Tent Bracket 4 Piece from The Bush Company is a premium stainless steel mounting solution designed to securely attach awnings to compatible rooftop tents. Built for expedition-grade durability and vibration-free performance, this bracket system offers seamless integration with The Bush Company’s Ezi-Slot-equipped AX27, DX27, TX27, and TX27 MAX tents and supports confident touring across Australia’s most demanding terrains.
Constructed from stainless steel with a black powder-coated finish, the Awning To Tent Bracket 4 Piece is engineered to withstand the extreme conditions of the outback and coast alike. The corrosion-resistant build ensures long-term reliability in high-salinity environments, while its structural rigidity helps maintain awning stability over thousands of kilometres of corrugated tracks.
The bracket system resists UV degradation, rust, and abrasion—making it the trusted choice for overlanders, remote tourers, and long-term 4WD travellers.
This three-piece bracket system includes two main mounting brackets and two reinforced corner plates designed to support heavy-duty awnings weighing up to 40kg. It effectively manages torsional forces generated by 270-degree awnings during wind gusts, tough tracks, or awning deployment, helping to protect both your rooftop tent and awning investment.
The bracket’s universal side-mount layout accommodates left- or right-hand positioning, allowing you to configure your setup to suit your touring rig.
Compatible with The Bush Company’s rooftop tents (AX27, DX27, TX27 and TX27 MAX), this bracket system slots directly into the Ezi-Slot channel system without drilling or modification. Installation using the included stainless steel bolts and nyloc nuts ensures a flush, stable connection to your tent frame while dramatically reducing setup time.
Unlike generic mounting systems, this bracket is engineered to preserve the structural integrity of your tent while eliminating the guesswork and added cost of aftermarket hardware.
The bracket is designed to handle the unique mounting demands of wraparound awnings like the 270 XT™ and 270 XT MAX™, delivering secure hold and structural support without the need for additional reinforcement. It is also compatible with optional Spring Rod Adapters for upward-pitched awnings, helping to eliminate interference between poles and brackets. When mounting the standard 270 XT Awning Mk2, only the corner piece at the hinged end of the awning should be installed.
This design ensures that your awning deploys smoothly and holds firm, even in unpredictable off-road environments.
Engineered for vehicles built for extended outback travel, the Awning To Tent Bracket 4 Piece supports a fully modular setup. Whether you’re running a full touring canopy or a minimalist rooftop tent build, this bracket delivers long-term strength, simplified installation, and compatibility with other Ezi-Slot accessories.
The Awning To Tent Bracket delivers the durability and fitment confidence needed for secure awning mounting in the most challenging conditions. With ecosystem alignment, tool-free installation, and high-strength stainless steel construction, it is an essential upgrade for 4WD adventurers and expedition-ready rigs.
NOTE: if you need to mount the awning bracket pointing upwards due to your vehicle configuration, we recommend purchasing the Spring Road Adapter with the awning bracket. The Spring Rod Adapter eliminates the need to bend a ‘dog leg’ in the spring steel pole of your tent to clear the awning when deployed.
The Awning To Tent Bracket 4 Piece from The Bush Company is a premium stainless steel mounting solution designed to securely attach awnings to compatible rooftop tents. Built for expedition-grade durability and vibration-free performance, this bracket system offers seamless integration with The Bush Company’s Ezi-Slot-equipped AX27, DX27, TX27, and TX27 MAX tents and supports confident touring across Australia’s most demanding terrains.
Constructed from stainless steel with a black powder-coated finish, the Awning To Tent Bracket 4 Piece is engineered to withstand the extreme conditions of the outback and coast alike. The corrosion-resistant build ensures long-term reliability in high-salinity environments, while its structural rigidity helps maintain awning stability over thousands of kilometres of corrugated tracks.
The bracket system resists UV degradation, rust, and abrasion—making it the trusted choice for overlanders, remote tourers, and long-term 4WD travellers.
This three-piece bracket system includes two main mounting brackets and two reinforced corner plates designed to support heavy-duty awnings weighing up to 40kg. It effectively manages torsional forces generated by 270-degree awnings during wind gusts, tough tracks, or awning deployment, helping to protect both your rooftop tent and awning investment.
The bracket’s universal side-mount layout accommodates left- or right-hand positioning, allowing you to configure your setup to suit your touring rig.
Compatible with The Bush Company’s rooftop tents (AX27, DX27, TX27 and TX27 MAX), this bracket system slots directly into the Ezi-Slot channel system without drilling or modification. Installation using the included stainless steel bolts and nyloc nuts ensures a flush, stable connection to your tent frame while dramatically reducing setup time.
Unlike generic mounting systems, this bracket is engineered to preserve the structural integrity of your tent while eliminating the guesswork and added cost of aftermarket hardware.
The bracket is designed to handle the unique mounting demands of wraparound awnings like the 270 XT™ and 270 XT MAX™, delivering secure hold and structural support without the need for additional reinforcement. It is also compatible with optional Spring Rod Adapters for upward-pitched awnings, helping to eliminate interference between poles and brackets. When mounting the standard 270 XT Awning Mk2, only the corner piece at the hinged end of the awning should be installed.
This design ensures that your awning deploys smoothly and holds firm, even in unpredictable off-road environments.
Engineered for vehicles built for extended outback travel, the Awning To Tent Bracket 4 Piece supports a fully modular setup. Whether you’re running a full touring canopy or a minimalist rooftop tent build, this bracket delivers long-term strength, simplified installation, and compatibility with other Ezi-Slot accessories.
The Awning To Tent Bracket delivers the durability and fitment confidence needed for secure awning mounting in the most challenging conditions. With ecosystem alignment, tool-free installation, and high-strength stainless steel construction, it is an essential upgrade for 4WD adventurers and expedition-ready rigs.
NOTE: if you need to mount the awning bracket pointing upwards due to your vehicle configuration, we recommend purchasing the Spring Road Adapter with the awning bracket. The Spring Rod Adapter eliminates the need to bend a ‘dog leg’ in the spring steel pole of your tent to clear the awning when deployed.
We serve customers globally, however we don't offer online purchasing on this website. For specific shipping international information, please contact us directly through our Contact Us page.
We stand behind the quality of our products. For detailed warranty information, please refer to the individual product or vist our warranty page.
You can locate authorised retailers using the Find A Store feature on our website.
Setting up the the perfect trailer solution. Putting the ultimate Bruder EXP-4 with a TX27 Max and 2 x 180XT Max Awnings
The Bush Company Rooftop tents & awnings have had a long history to become the best on the market.
The LX27 is the ultimate lightweight tent designed to still be the perfect touring companion.
This 79 series is kitted out with our TX27 Max, A 270XT Max freestanding awning and our Outhouse shower tent.
Stay up to date with all the Bush Company products and adventures.
The Awning To Tent Bracket 4 Piece from The Bush Company is a premium stainless steel mounting solution designed to securely attach awnings to compatible rooftop tents. Built for expedition-grade durability and vibration-free performance, this bracket system offers seamless integration with The Bush Company’s Ezi-Slot-equipped AX27, DX27, TX27, and TX27 MAX tents and supports confident touring across Australia’s most demanding terrains.
Constructed from stainless steel with a black powder-coated finish, the Awning To Tent Bracket 4 Piece is engineered to withstand the extreme conditions of the outback and coast alike. The corrosion-resistant build ensures long-term reliability in high-salinity environments, while its structural rigidity helps maintain awning stability over thousands of kilometres of corrugated tracks.
The bracket system resists UV degradation, rust, and abrasion—making it the trusted choice for overlanders, remote tourers, and long-term 4WD travellers.
This three-piece bracket system includes two main mounting brackets and two reinforced corner plates designed to support heavy-duty awnings weighing up to 40kg. It effectively manages torsional forces generated by 270-degree awnings during wind gusts, tough tracks, or awning deployment, helping to protect both your rooftop tent and awning investment.
The bracket’s universal side-mount layout accommodates left- or right-hand positioning, allowing you to configure your setup to suit your touring rig.
Compatible with The Bush Company’s rooftop tents (AX27, DX27, TX27 and TX27 MAX), this bracket system slots directly into the Ezi-Slot channel system without drilling or modification. Installation using the included stainless steel bolts and nyloc nuts ensures a flush, stable connection to your tent frame while dramatically reducing setup time.
Unlike generic mounting systems, this bracket is engineered to preserve the structural integrity of your tent while eliminating the guesswork and added cost of aftermarket hardware.
The bracket is designed to handle the unique mounting demands of wraparound awnings like the 270 XT™ and 270 XT MAX™, delivering secure hold and structural support without the need for additional reinforcement. It is also compatible with optional Spring Rod Adapters for upward-pitched awnings, helping to eliminate interference between poles and brackets. When mounting the standard 270 XT Awning Mk2, only the corner piece at the hinged end of the awning should be installed.
This design ensures that your awning deploys smoothly and holds firm, even in unpredictable off-road environments.
Engineered for vehicles built for extended outback travel, the Awning To Tent Bracket 4 Piece supports a fully modular setup. Whether you’re running a full touring canopy or a minimalist rooftop tent build, this bracket delivers long-term strength, simplified installation, and compatibility with other Ezi-Slot accessories.
The Awning To Tent Bracket delivers the durability and fitment confidence needed for secure awning mounting in the most challenging conditions. With ecosystem alignment, tool-free installation, and high-strength stainless steel construction, it is an essential upgrade for 4WD adventurers and expedition-ready rigs.
NOTE: if you need to mount the awning bracket pointing upwards due to your vehicle configuration, we recommend purchasing the Spring Road Adapter with the awning bracket. The Spring Rod Adapter eliminates the need to bend a ‘dog leg’ in the spring steel pole of your tent to clear the awning when deployed.
2-Year Warranty
Adventure confidently.
Engineered to Last
Exclusive B-Tech™ Alloy Extrusion Technology
Made in South Africa
Australian Owned, Tested Globally.
Online Support Centre
Expert Help and Advice.