{"title":"Rooftop Tent Accessories, Spares and Fitment","description":"\u003cp\u003eThe Bush Company has a complete range of rooftop tent accessories, spares and fitment solutions available.\u003c\/p\u003e","products":[{"product_id":"flat-plate-fitment-bracket","title":"Flat Plate Fitment Bracket (4 in Set)","description":"\u003ch3\u003eFlat Plate Fitment Brackets: low-profile mounting for crossing channels\u003c\/h3\u003e\n\u003cp\u003eWhere two extruded channels are \u003cstrong\u003elaid across one another\u003c\/strong\u003e, a Flat Plate clamps them together at the crossing point, with no load bar or raised bracket in between. That keeps the installation as low as possible, which means less wind noise and drag and better clearance in garages and car parks.\u003c\/p\u003e\n\u003ch4\u003eWhere to use them\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof racks:\u003c\/strong\u003e they're ideal for fixing a roof rack, such as our \u003ca href=\"\/collections\/canopy-roof-accessories\/products\/explorer-roof-rack\"\u003eExplorer Roof Rack\u003c\/a\u003e, to roof rails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRooftop tents:\u003c\/strong\u003e for a low installation where the tent's channels cross the rails or bars underneath. They are \u003cstrong\u003enot suitable for the AX27, DX27, TX27 or TX27 MAX\u003c\/strong\u003e, because the foot rails on those tents are too wide.\u003c\/li\u003e\n\u003cli\u003eWhere the channels sit perpendicular to each other and you need to fix to the outside edge of the tent's rails, use the \u003ca href=\"\/products\/flush-mount-bracket\"\u003eFlush Mount Brackets\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow many you need\u003c\/h4\u003e\n\u003cp\u003eWe recommend a minimum of three fixing points on each side of a rooftop tent, so a tent needs \u003cstrong\u003etwo sets\u003c\/strong\u003e. Each plate is \u003cstrong\u003e81mm × 81mm\u003c\/strong\u003e with four slotted holes, so you can line the channels up even when the spacing isn't exact.\u003c\/p\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: four plates, 16 stainless steel bolts, washers and nyloc nuts\u003c\/li\u003e\n\u003cli\u003ePlate size: 81mm × 81mm, four slotted holes\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm stainless steel, black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eRecommended: two sets per rooftop tent (at least three fixing points per side)\u003c\/li\u003e\n\u003cli\u003eNot suitable for: AX27, DX27, TX27 and TX27 MAX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429310505022,"sku":"4RTFFB","price":75.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Flat-Fitment-Bracket-4-in-Set-single-plate.jpg?v=1748155760"},{"product_id":"flush-mount-bracket","title":"Flush Mount Bracket (4 in Set)","description":"\u003ch3\u003eFlush Mount Brackets: low-profile tent mounting on extruded rails\u003c\/h3\u003e\n\u003cp\u003eIf your roof rack or canopy roof already has extruded rails running perpendicular to the extrusions under your tent, the Flush Mount Brackets let you bolt a Bush Company rooftop tent \u003cstrong\u003estraight onto them\u003c\/strong\u003e. There are no load bars in between, so the tent sits flush and the installation stays very low.\u003c\/p\u003e\n\u003ch4\u003eHow they fit\u003c\/h4\u003e\n\u003cp\u003eEach bracket attaches to the \u003cstrong\u003eoutside edge of an extruded rail beneath the tent\u003c\/strong\u003e and bolts down into the rail on the rack or canopy.\u003c\/p\u003e\n\u003ch4\u003eHow many you need\u003c\/h4\u003e\n\u003cp\u003eWe recommend a minimum of \u003cstrong\u003ethree fixing points on each side\u003c\/strong\u003e of a rooftop tent, so \u003cstrong\u003esix brackets is the minimum\u003c\/strong\u003e: order two sets of four.\u003c\/p\u003e\n\u003cp\u003eWhere the channels cross one on top of the other instead, the \u003ca href=\"\/products\/flat-plate-fitment-bracket\"\u003eFlat Plate Fitment Brackets\u003c\/a\u003e may suit better.\u003c\/p\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. For other ways to mount your tent, see our \u003ca href=\"\/collections\/rooftop-tent-fitment-solutions\"\u003erooftop tent fitment solutions\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: four brackets with stainless steel bolts, washers and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eMaterial: 3mm stainless steel, black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eRecommended: at least six brackets (three per side), so two sets per tent\u003c\/li\u003e\n\u003cli\u003eSuits: Bush Company rooftop tents on extruded roof rack or canopy rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429310537790,"sku":"4RTFMB","price":98.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Flush-Mount-Bracket-installed-v2.jpg?v=1748155760"},{"product_id":"z-rail-bracket-set","title":"Z-Rail Bracket Set","description":"\u003ch3\u003eZ-Rail Bracket Set: lift your tent 36.5mm\u003c\/h3\u003e\n\u003cp\u003eSome installations need the tent raised a little: on top of a canopy, where the tent has to clear the cab, or on a roof rack with a raised lip around the edge. The Z-Rail Bracket Set lifts a Bush Company rooftop tent \u003cstrong\u003e36.5mm\u003c\/strong\u003e and gives it a longer, wider mounting edge than the rails or bars underneath.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom edge:\u003c\/strong\u003e 1438mm long and 43mm wide, bolts to the canopy or roof rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop edge:\u003c\/strong\u003e 1709mm long and 69mm wide, takes the rooftop tent.\u003c\/li\u003e\n\u003cli\u003eThe Z profile lifts the tent 36.5mm, enough to clear a lipped rack edge or the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBefore you fit it\u003c\/h4\u003e\n\u003cp\u003eEach rail weighs 5kg. As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. See our \u003ca href=\"\/collections\/rooftop-tent-fitment-solutions\"\u003erooftop tent fitment solutions\u003c\/a\u003e for other mounting options.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two rails, one per side\u003c\/li\u003e\n\u003cli\u003eLift: 36.5mm\u003c\/li\u003e\n\u003cli\u003eBottom (vehicle) edge: 1438mm long × 43mm wide\u003c\/li\u003e\n\u003cli\u003eTop (tent) edge: 1709mm long × 69mm wide\u003c\/li\u003e\n\u003cli\u003eWeight: 5kg per rail\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined 3mm steel, black powder coat\u003c\/li\u003e\n\u003cli\u003eSuits: canopy roofs, raised-lip roof racks and installations that need to clear the cab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429310603326,"sku":"4RTZRB35","price":395.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTZRB35-Z-Rails-Bracket-Set-3.jpg?v=1748155760"},{"product_id":"slat-extension-brackets","title":"Slat Extension Brackets","description":"\u003ch3\u003eSlat Extension Brackets: when the load bars don't line up\u003c\/h3\u003e\n\u003cp\u003eUnder our earlier Classic and Black Series rooftop tents, the tent mounts through extruded rails. On some vehicles the load bars simply don't sit where those rails are. The Slat Extension Brackets fix that: an \u003cstrong\u003ealuminium slat with the same profile as the tent's extrusions\u003c\/strong\u003e fits between two of them and creates a bridge exactly where your load bar is.\u003c\/p\u003e\n\u003ch4\u003eFitting tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAll the fittings to attach the slat to the existing extrusions are included.\u003c\/li\u003e\n\u003cli\u003eThe only tool you need is a \u003cstrong\u003e13mm socket or spanner\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eSlide the bolt you'll use to secure the load bar into position \u003cstrong\u003ebefore\u003c\/strong\u003e you attach the slat to the extrusions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe've used these on custom canopies where the roof bars couldn't be moved. See our \u003ca href=\"\/collections\/rooftop-tent-fitment-solutions\"\u003erooftop tent fitment solutions\u003c\/a\u003e for other options.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold as: a pair\u003c\/li\u003e\n\u003cli\u003eMaterial: extruded aluminium slat, same profile as the tent's mounting extrusions\u003c\/li\u003e\n\u003cli\u003eIncludes: all fittings to attach the slat to the tent extrusions\u003c\/li\u003e\n\u003cli\u003eTools: 13mm socket or spanner\u003c\/li\u003e\n\u003cli\u003eSuits: earlier Classic and Black Series rooftop tents only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429310668862,"sku":"4RTSEB","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Slat-Extension-Installed-Close-Up.jpg?v=1731644537"},{"product_id":"classic-awning-to-tent-bracket","title":"Classic Awning To Tent Bracket","description":"\u003ch3\u003eClassic Awning To Tent Bracket\u003c\/h3\u003e\n\u003cp\u003eThis pair of brackets is made to mount an awning on our earlier \u003cstrong\u003eClassic and Black Series\u003c\/strong\u003e rooftop tents. They bolt into the tent's Ezi-Slot channels, so there's no drilling and nothing to modify on the tent, and they take an awning up to \u003cstrong\u003e30kg\u003c\/strong\u003e on the left or right side.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo brackets, for mounting on the \u003cstrong\u003eleft or right side\u003c\/strong\u003e of the tent.\u003c\/li\u003e\n\u003cli\u003eCNC-folded stainless steel with a reinforced corner plate, to resist twist and vibration.\u003c\/li\u003e\n\u003cli\u003eBlack powder coat; stainless steel bolts and nyloc nuts included.\u003c\/li\u003e\n\u003cli\u003eRated to 30kg, so they aren't designed to carry the larger 270 XT MAX awning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhich bracket for my tent?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eClassic and Black Series: these brackets.\u003c\/li\u003e\n\u003cli\u003eAX27, TX27, TX27 MAX and DX27: the \u003ca href=\"\/products\/awning-to-tent-bracket-4-piece-ax27-tx27-max-dx27\"\u003eAwning To Tent Bracket 4 Piece\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eLX27 Gen 1 and Gen 2: the \u003ca href=\"\/products\/awning-to-tent-bracket-4-piece\"\u003eAwning To Tent Bracket 4 Piece – LX27\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn our other tents, these brackets can also be used to mount accessories.\u003c\/p\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two brackets with stainless steel bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eRating: awnings up to 30kg\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot channels, left or right side\u003c\/li\u003e\n\u003cli\u003eMade for: Classic and Black Series rooftop tents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429311324222,"sku":"4RTCATB","price":236.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTCATB-ClassicAwningToTentBracket.jpg?v=1760413726"},{"product_id":"sirocco-12v-fan-bracket","title":"Sirocco 12V Fan Bracket","description":"\u003ch3\u003eSirocco 12V Fan Bracket for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eFit this bracket once and your \u003ca href=\"\/products\/sirocco-12v-fan\"\u003eSirocco II fan\u003c\/a\u003e has a fixed home in the roof of the tent, above the bed where the airflow helps most. It suits the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e and the earlier DX27.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe bracket is riveted to the \u003cstrong\u003einternal roof beams\u003c\/strong\u003e of the tent with the aluminium rivets supplied.\u003c\/li\u003e\n\u003cli\u003eThe fan slides into and out of the bracket in seconds.\u003c\/li\u003e\n\u003cli\u003eSet the fan lowered for more airflow, or flush against the roof.\u003c\/li\u003e\n\u003cli\u003eTake the fan out before closing the tent (the bracket stays in place). Leaving it fitted while the tent is closed isn't recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRun the fan's cable up the zippered cable channels inside the roof to the tent's 12V socket.\u003c\/p\u003e\n\u003cp\u003eFor the \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e, use the \u003ca href=\"\/products\/sirocco-12v-fan-mount-plate\"\u003eSirocco 12V Fan Mount Plate\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish, laser-cut logo\u003c\/li\u003e\n\u003cli\u003eMounting: internal roof beams, aluminium rivets supplied\u003c\/li\u003e\n\u003cli\u003eFits: AX27, TX27, TX27 MAX and DX27 rooftop tents\u003c\/li\u003e\n\u003cli\u003eFan: Sirocco II, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429311422526,"sku":"4RTASFB","price":65.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTASFBFanBracket2.jpg?v=1775463163"},{"product_id":"hi-lift-jack-mount-bracket","title":"Hi-Lift Jack Mount Bracket","description":"\u003ch3\u003eHi-Lift Jack Mount Bracket: your jack, where you can reach it\u003c\/h3\u003e\n\u003cp\u003eA Hi-Lift jack is awkward to store inside a vehicle. This two-part bracket carries it on the tent instead: the clamps bolt into the Ezi-Slot channels on the side of a Bush Company rooftop tent and hold the jack \u003cstrong\u003eby its head and its foot\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBolt the two brackets into the Ezi-Slot channels, spaced to suit your jack. No drilling.\u003c\/li\u003e\n\u003cli\u003eSeat the jack and tighten the hand knobs; loosen them to take it off.\u003c\/li\u003e\n\u003cli\u003eFit it foot up or foot down, whichever suits the side of the vehicle you load from.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuits most \u003cstrong\u003e48in Hi-Lift jacks up to 13kg\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two brackets with clamps and hand knobs, stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eCapacity: Hi-Lift jacks up to 48in and 13kg\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC laser-cut stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot channels on Bush Company rooftop tents\u003c\/li\u003e\n\u003cli\u003eFits: AX27, TX27, TX27 MAX and DX27 (not the LX27 Gen 1 or Gen 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429311488062,"sku":"4RTAHJB","price":131.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTAHJB-Hi-LiftJackMount.jpg?v=1775462374"},{"product_id":"lightbar-bracket-set","title":"Lightbar Bracket Set","description":"\u003ch3\u003eLightbar Bracket Set: lighting mounted on the tent\u003c\/h3\u003e\n\u003cp\u003eThis pair of brackets lets you mount an LED light bar or a pair of spotlights on a Bush Company rooftop tent, for camp lighting or extra light on the track. They bolt into the Ezi-Slot channels on the tent, so there's no drilling.\u003c\/p\u003e\n\u003ch4\u003eWhat it takes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight bars\u003c\/strong\u003e up to about 813mm (32in) long, or \u003cstrong\u003epaired spotlights\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 9kg\u003c\/strong\u003e per set.\u003c\/li\u003e\n\u003cli\u003eSlotted holes accept \u003cstrong\u003eM8 or M10\u003c\/strong\u003e bolts, so you can fine-tune the position and angle.\u003c\/li\u003e\n\u003cli\u003eMount the lights vertically or horizontally.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe brackets also let you mount a \u003ca href=\"\/products\/ladder-mount-bracket\"\u003eLadder Mount Bracket\u003c\/a\u003e to a roof rack.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two brackets with stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eCapacity: up to 9kg per set; light bars up to about 813mm (32in)\u003c\/li\u003e\n\u003cli\u003eLight fixing: slotted holes for M8 or M10 bolts\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eFits: \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e and DX27; not suitable for either LX27 model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the wiring route and your local lighting rules before you fit driving lights.\u003c\/p\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429311586366,"sku":"4RTASLB","price":55.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTASLB-Light-Bar-Bracket-2.png?v=1757673582"},{"product_id":"rooftop-tent-load-bars","title":"Rooftop Tent Load Bars","description":"\u003ch3\u003eRooftop Tent Load Bars: a rack on the roof of your tent\u003c\/h3\u003e\n\u003cp\u003eOur hard shell tents are built to carry gear on the roof when they're closed. These load bars bolt straight into the tent's Ezi-Slot channels, so there's no drilling, and give you a solid base for \u003ca href=\"\/products\/solar-panels\"\u003esolar panels\u003c\/a\u003e, \u003ca href=\"\/products\/recovery-tracks-load-bar-set\"\u003erecovery tracks\u003c\/a\u003e and other kit.\u003c\/p\u003e\n\u003ch4\u003eWhich length?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1390mm:\u003c\/strong\u003e \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and the earlier DX27.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1590mm:\u003c\/strong\u003e \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e:\u003c\/strong\u003e the 1390mm bars, fitted with the \u003ca href=\"\/products\/load-bar-high-foot-mount\"\u003eLoad Bar High Foot Mount\u003c\/a\u003e (required).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLX27 Gen 1:\u003c\/strong\u003e these bars don't fit; use the \u003ca href=\"\/products\/adjustable-load-bar\"\u003eAdjustable Load Bar\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBuilt for the roof\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruded aluminium\u003c\/strong\u003e with a matte black powder coat, and a low profile that keeps wind noise down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEzi-Slot channel along each bar\u003c\/strong\u003e takes our accessory brackets and M8 bolts, so you can move gear around without drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel hardware\u003c\/strong\u003e to resist corrosion on coastal trips.\u003c\/li\u003e\n\u003cli\u003eAdd the \u003ca href=\"\/products\/load-bar-high-foot-mount\"\u003eLoad Bar High Foot Mount\u003c\/a\u003e to raise the bars: the top of the bar then sits 75mm above the roof on the AX27, DX27, TX27 and TX27 MAX, or 60mm on the LX27 Gen 2, for more clearance under solar panels or longer gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow much can they carry?\u003c\/h4\u003e\n\u003cp\u003eThe bars are rated to 100kg per set, but the limit on the roof is always the lowest rating in the chain. The tents are rated, closed, to 200kg dynamic (AX27), 100kg dynamic (LX27 Gen 2) and 75kg dynamic (TX27 and TX27 MAX). As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold as: a set of two bars\u003c\/li\u003e\n\u003cli\u003eLengths: 1390mm (AX27, TX27, DX27; LX27 Gen 2 with High Foot Mounts) or 1590mm (TX27 MAX)\u003c\/li\u003e\n\u003cli\u003eNot suitable for: LX27 Gen 1\u003c\/li\u003e\n\u003cli\u003eMaterial: extruded aluminium, matte black powder coat\u003c\/li\u003e\n\u003cli\u003eAccessory mounting: Ezi-Slot channel, M8 bolts\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel\u003c\/li\u003e\n\u003cli\u003eRating: 100kg per set, subject to the rating of the tent, rack and vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Load Bar Set 1390mm","offer_id":41429311619134,"sku":"4RRLB1390","price":385.0,"currency_code":"AUD","in_stock":false},{"title":"For TX27 MAX - 1590mm","offer_id":41429311651902,"sku":"4RRLB1490","price":398.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/TX27MAXRoofLoadBar2.jpg?v=1748155759"},{"product_id":"recovery-tracks-load-bar-set","title":"Recovery Tracks-Load Bar Set","description":"\u003ch3\u003eRecovery Tracks Load Bar Set: tracks on the roof, ready to grab\u003c\/h3\u003e\n\u003cp\u003eThis pair of brackets holds recovery tracks flat across our \u003ca href=\"\/products\/rooftop-tent-load-bars\"\u003eRooftop Tent Load Bars\u003c\/a\u003e or canopy load bars with Ezi-Slot channels. It suits MAXTRAX, TRED Pro and other standard recovery boards.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe brackets slide into the Ezi-Slot channels on the load bars and bolt down with stainless steel hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 × 80mm stainless steel bolts\u003c\/strong\u003e pass through the tracks' mounting holes and take \u003cstrong\u003etwo to four tracks\u003c\/strong\u003e, depending on how thick they are.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge wing nuts\u003c\/strong\u003e tighten by hand, so there are no tools to find when you need the tracks in a hurry.\u003c\/li\u003e\n\u003cli\u003ePrefer your track maker's quick-release pins? They can replace the M10 bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRated to \u003cstrong\u003e20kg in total\u003c\/strong\u003e. As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eBuilt for the roof\u003c\/h4\u003e\n\u003cp\u003eThe brackets are laser-cut from stainless steel and finished in satin black powder coat, for salt air and long corrugated runs.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two brackets, M10 × 80mm stainless steel bolts and wing nuts\u003c\/li\u003e\n\u003cli\u003eCapacity: two to four recovery tracks, up to 20kg in total\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, satin black powder coat\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot load bars (load bars sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant the tracks on the side of the tent instead? See the \u003ca href=\"\/products\/recovery-tracks-side-mount-set\"\u003eRecovery Tracks Side Mount Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429311717438,"sku":"4RTMLBB","price":165.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTMLBBRecoveryTracks-LoadBarSet2.jpg?v=1775370725"},{"product_id":"recovery-tracks-side-mount-set","title":"Recovery Tracks-Side Mount Set","description":"\u003ch3\u003eRecovery Tracks Side Mount Set: tracks on the side of the tent\u003c\/h3\u003e\n\u003cp\u003eMounting your recovery tracks on the side of the tent leaves the roof free for \u003ca href=\"\/products\/solar-panels\"\u003esolar panels\u003c\/a\u003e, \u003ca href=\"\/products\/rooftop-tent-load-bars\"\u003eload bars\u003c\/a\u003e or other gear. These brackets bolt into the Ezi-Slot channels on the side of a Bush Company rooftop tent, with no drilling.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 × 80mm stainless steel bolts\u003c\/strong\u003e go through the tracks' mounting holes; the length suits tracks of different thicknesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge wing nuts\u003c\/strong\u003e come off by hand, so the tracks are quick to grab.\u003c\/li\u003e\n\u003cli\u003eYour track maker's quick-release pins can replace the M10 bolts.\u003c\/li\u003e\n\u003cli\u003eThe tracks sit clear of the lid, so the tent still opens and closes normally.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHolds up to \u003cstrong\u003efour tracks\u003c\/strong\u003e, with a weight limit of \u003cstrong\u003e12kg\u003c\/strong\u003e. It suits MAXTRAX MkII, TRED Pro and other standard boards.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: brackets, M10 × 80mm stainless steel bolts and wing nuts\u003c\/li\u003e\n\u003cli\u003eCapacity: up to four recovery tracks, 12kg maximum\u003c\/li\u003e\n\u003cli\u003eMaterial: laser-cut stainless steel, satin black powder coat\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot channels on the side of the tent\u003c\/li\u003e\n\u003cli\u003eFits: all Bush Company rooftop tents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429311750206,"sku":"4RTAMTB","price":195.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTAMTB-RecoveryTracks-SideMountSet.jpg?v=1775369840"},{"product_id":"shovel-mount-bracket","title":"Shovel Mount Bracket","description":"\u003ch3\u003eShovel Mount Bracket: a shovel that's always on hand\u003c\/h3\u003e\n\u003cp\u003eWhen you need a shovel, you need it now. This pair of brackets carries one on your Bush Company rooftop tent, out of the way of the cargo area and quick to reach.\u003c\/p\u003e\n\u003ch4\u003eWhere it mounts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e and DX27:\u003c\/strong\u003e on the side of the tent's \u003cstrong\u003elid\u003c\/strong\u003e, in the Ezi-Slot channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLX27 Gen 1 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e:\u003c\/strong\u003e on a load bar on the roof of the tent.\u003c\/li\u003e\n\u003cli\u003eMount it to the lid only, never the base of the tent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBoth brackets bolt on with the supplied stainless steel bolts. No drilling.\u003c\/li\u003e\n\u003cli\u003eThe adjustable clamp holds handles from \u003cstrong\u003e32mm to 42mm\u003c\/strong\u003e in diameter.\u003c\/li\u003e\n\u003cli\u003eA hand knob tightens and releases the clamp, so getting the shovel off takes seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two brackets (pair) with clamps, knobs and stainless steel bolts\u003c\/li\u003e\n\u003cli\u003eHandle size: 32mm to 42mm diameter\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eMounting: side of the lid on AX27, TX27, TX27 MAX and DX27; load bar on LX27 tents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429312012350,"sku":"4RTASB","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTASB-ShovelMountBracket10.jpg?v=1750997139"},{"product_id":"rooftop-tent-organiser","title":"Rooftop Tent Organiser","description":"\u003ch3\u003eRooftop Tent Organiser\u003c\/h3\u003e\n\u003cp\u003eThe small things are what clutter a tent at night. This organiser hangs from the roof, over the bed, and keeps them in reach and off the mattress.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e come with \u003cstrong\u003etwo organisers\u003c\/strong\u003e in the roof as standard, which is where their six roof pouches come from. You can add \u003cstrong\u003eup to two more\u003c\/strong\u003e organisers, or use one to replace a worn set.\u003c\/p\u003e\n\u003ch4\u003eVersions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAX27 and DX27:\u003c\/strong\u003e a zipped pocket at each end and a large central pouch; 117cm × 39cm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTX27:\u003c\/strong\u003e three zippered pouches; 117cm × 39cm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTX27 MAX:\u003c\/strong\u003e three zippered pouches, wider to suit the tent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e300gsm ripstop polyester.\u003c\/li\u003e\n\u003cli\u003eA full-length Velcro strip on the back presses onto the roof lining, with no tracks or hooks to fit.\u003c\/li\u003e\n\u003cli\u003ePlenty of storage without eating into headroom.\u003c\/li\u003e\n\u003cli\u003ePacks flat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePouches: three per organiser\u003c\/li\u003e\n\u003cli\u003eSize: 117cm × 39cm (AX27\/DX27 and TX27 versions); TX27 MAX version wider\u003c\/li\u003e\n\u003cli\u003eMaterial: 300gsm ripstop polyester\u003c\/li\u003e\n\u003cli\u003eMounting: full-length Velcro strip\u003c\/li\u003e\n\u003cli\u003eVersions: AX27 and DX27; TX27; TX27 MAX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"AX27 \u0026 DX27 Tents","offer_id":41429312110654,"sku":"4RTROA","price":185.0,"currency_code":"AUD","in_stock":true},{"title":"TX27 Tents","offer_id":41429312176190,"sku":"4RTROTX","price":185.0,"currency_code":"AUD","in_stock":true},{"title":"TX27 MAX Tents","offer_id":41429312208958,"sku":"4RTROTXM","price":185.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTRO-AX27ClamshellRooftopTentRoofPouches.jpg?v=1791179820"},{"product_id":"solar-panel-bracket","title":"Solar Panel Bracket","description":"\u003ch3\u003eSolar Panel Bracket for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eThis pair of brackets fixes a \u003ca href=\"\/products\/solar-panels\"\u003esolar panel\u003c\/a\u003e to the roof of a Bush Company rooftop tent. The brackets bolt into the tent's Ezi-Slot channels and lift the panel off the shell, leaving an \u003cstrong\u003eair gap underneath\u003c\/strong\u003e. Solar panels lose output as they heat up, so the airflow helps them work harder on hot days.\u003c\/p\u003e\n\u003ch4\u003eTwo sizes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAX27, TX27 and DX27:\u003c\/strong\u003e fits the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and the earlier DX27.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTX27 MAX:\u003c\/strong\u003e longer brackets for the \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe brackets have laser-cut holes that line up with the tent's Ezi-Slot channels, and bolt on with stainless steel bolts.\u003c\/li\u003e\n\u003cli\u003eThe panel is riveted to the brackets: you drill the rivet holes into the panel's frame.\u003c\/li\u003e\n\u003cli\u003eSupports panels up to \u003cstrong\u003e20kg\u003c\/strong\u003e per pair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two brackets, stainless steel bolts and rivets\u003c\/li\u003e\n\u003cli\u003eMaterial: 2.5mm stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eCapacity: panels up to 20kg\u003c\/li\u003e\n\u003cli\u003eVariants: AX27, TX27 and DX27; or TX27 MAX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"For AX27, DX27, TX27 Tents","offer_id":41429312503870,"sku":"4RTSPB","price":210.0,"currency_code":"AUD","in_stock":false},{"title":"TX27 MAX Tents","offer_id":41429312536638,"sku":"4RTSPBM","price":230.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTSPB-SolarPanelBracketsSet-AX27_DX27_TX27.jpg?v=1774397390"},{"product_id":"load-bar-high-foot-mount","title":"Load Bar High Foot Mount","description":"\u003ch3\u003eLoad Bar High Foot Mount: more clearance on the tent roof\u003c\/h3\u003e\n\u003cp\u003eFit these feet under our \u003ca href=\"\/products\/rooftop-tent-load-bars\"\u003eRooftop Tent Load Bars\u003c\/a\u003e and the top of the bar sits \u003cstrong\u003e75mm above the tent roof\u003c\/strong\u003e on the AX27, DX27, TX27 and TX27 MAX, or \u003cstrong\u003e60mm\u003c\/strong\u003e on the LX27 Gen 2. That extra space helps in a few ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eair can move under a \u003ca href=\"\/products\/solar-panels\"\u003esolar panel\u003c\/a\u003e, which helps keep it cool and producing power\u003c\/li\u003e\n\u003cli\u003eflatter gear such as recovery tracks or a slim storage box fits underneath\u003c\/li\u003e\n\u003cli\u003ebulkier mounts clear the tent lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cp\u003eThe feet bolt into the Ezi-Slot channels on the tent roof with the supplied stainless steel M8 bolts and nyloc nuts, and the load bar bolts to the top. There's no drilling.\u003c\/p\u003e\n\u003cp\u003eThey fit the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e, DX27 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e, and are \u003cstrong\u003erequired\u003c\/strong\u003e to fit the Rooftop Tent Load Bars to the LX27 Gen 2. They don't fit the LX27 Gen 1; use the \u003ca href=\"\/products\/adjustable-load-bar\"\u003eAdjustable Load Bar\u003c\/a\u003e on that tent.\u003c\/p\u003e\n\u003cp\u003eYou need \u003cstrong\u003eone pair per load bar\u003c\/strong\u003e, so two pairs for a set of bars.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeight, tent roof to top of a Rooftop Tent Load Bar: AX27, DX27, TX27 and TX27 MAX 75mm; LX27 Gen 2 60mm\u003c\/li\u003e\n\u003cli\u003eSold as: a pair; one pair per load bar\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel M8 bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eSuits: Rooftop Tent Load Bars on AX27, TX27, TX27 MAX, DX27 and LX27 Gen 2 tents (not the LX27 Gen 1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429312602174,"sku":"4RTULBHF","price":62.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTULBHF-LoadBarHighFootSet4.jpg?v=1774323031"},{"product_id":"spring-rod-adapter","title":"Spring Rod Adapter","description":"\u003ch3\u003eSpring Rod Adapter: keeps the rainfly pole clear of your awning\u003c\/h3\u003e\n\u003cp\u003eOn some vehicles, an awning mounted to the tent has to sit with its bracket pointing up. The rainfly's 8mm spring steel pole then runs into the awning. The old workaround was to bend a dog-leg into the pole. The Spring Rod Adapter \u003cstrong\u003eraises the pole's mounting point\u003c\/strong\u003e instead, so the pole clears the awning and the rainfly sits properly, with nothing bent or modified.\u003c\/p\u003e\n\u003ch4\u003eChoose your side\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeft:\u003c\/strong\u003e passenger side in Australia.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight:\u003c\/strong\u003e driver's side in Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBolts into the tent's Ezi-Slot channels at the corner, with the supplied stainless steel M8 bolts and nyloc nuts. No drilling.\u003c\/li\u003e\n\u003cli\u003eThe rainfly pole slots into the adapter as it would into the tent.\u003c\/li\u003e\n\u003cli\u003ePairs with our \u003ca href=\"\/collections\/awning-fitment-brackets?sort_by=title-ascending\u0026amp;filter.p.product_type=Awning+To+Tent+Brackets\"\u003eAwning-to-Tent brackets\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel M8 bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eVersions: left (AU passenger side) or right (AU driver's side)\u003c\/li\u003e\n\u003cli\u003eUse: Bush Company rooftop tents with a 270° awning mounted bracket-up\u003c\/li\u003e\n\u003cli\u003eFits: all Bush Company tents except the earlier Classic and Black Series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Left (Passenger side in AU)","offer_id":41429314830398,"sku":"4RTSRABL","price":83.0,"currency_code":"AUD","in_stock":true},{"title":"Right (Driver's side in AU)","offer_id":41429314863166,"sku":"4RTSRABR","price":83.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTSRAB_Spring_Rod_Adpater_3.jpg?v=1774318413"},{"product_id":"wide-ladder-mount-bracket","title":"Wide Ladder Mount Bracket","description":"\u003ch3\u003eWide Ladder Mount Bracket: clearance for the ladder\u003c\/h3\u003e\n\u003cp\u003eOn some vehicles the ladder can't hang straight from the tent: a wide canopy, a rear bar or a tent mounted further in gets in the way. The Wide Ladder Mount Bracket moves the ladder's hook point \u003cstrong\u003e70mm further out\u003c\/strong\u003e, so the ladder clears the obstruction and sits at a safe, steady angle.\u003c\/p\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBolts into the tent's Ezi-Slot channels in place of a standard \u003ca href=\"\/products\/ladder-mount-bracket\"\u003eLadder Mount Bracket\u003c\/a\u003e, with the supplied stainless steel M8 bolts and nyloc nuts. No drilling.\u003c\/li\u003e\n\u003cli\u003eTakes the \u003ca href=\"\/products\/ladder-mount-plate-deluxe-or-compact-ladder\"\u003eLadder Mount Plate\u003c\/a\u003e on the \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/deluxe-telescopic-ladder\"\u003eDeluxe\u003c\/a\u003e or \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/compact-telescopic-ladder\"\u003eCompact\u003c\/a\u003e Telescopic Ladder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e and DX27. For the LX27, use the \u003ca href=\"\/products\/wide-ladder-mount-bracket-lx27\"\u003eWide Ladder Mount Bracket – LX27\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtra clearance: 70mm\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel M8 bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eFits: AX27, TX27, TX27 MAX and DX27 (not LX27)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429314895934,"sku":"4RTWLMB","price":126.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTWLMB-Ladder-Mount-Bracket-WIDE-70mm-2-bolt-for-ladder-side.jpg?v=1731645236"},{"product_id":"rainfly-spring-steel-poles","title":"Rainfly Spring Steel Poles","description":"\u003ch3\u003eRainfly Spring Steel Poles for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eWhen you set up a Bush Company tent, the 8mm spring steel poles slot into place to hold the rainfly out over the entrances. That's what keeps the ladder and doorway dry, stops water pooling against the canvas, and lets you leave windows cracked open in the rain. If a pole bends or goes missing, this is the replacement.\u003c\/p\u003e\n\u003ch4\u003eWhich set?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge set:\u003c\/strong\u003e \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, DX27, LX27 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e, plus the \u003cstrong\u003efront\u003c\/strong\u003e rainfly on the \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall set:\u003c\/strong\u003e the \u003cstrong\u003erear\u003c\/strong\u003e window rainfly on the TX27 and TX27 MAX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8mm spring steel holds its shape and tension in wind, where lighter poles bend and stay bent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassivated finish:\u003c\/strong\u003e a chemical surface treatment that greatly improves the steel's corrosion resistance. Unlike paint or powder coat, it adds no layer to the metal, so the poles' size and look don't change.\u003c\/li\u003e\n\u003cli\u003eSold in pairs.\u003c\/li\u003e\n\u003cli\u003eIncludes a cutting guide if your installation needs a custom length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRunning a 270° awning mounted in the up position on the tent? The \u003ca href=\"\/products\/spring-rod-adapter\"\u003eSpring Rod Adapter\u003c\/a\u003e moves the pole clear of the awning.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 8mm spring steel, passivated finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSold as: pair\u003c\/li\u003e\n\u003cli\u003eLarge set: AX27, DX27, LX27, LX27 Gen 2; TX27 and TX27 MAX front\u003c\/li\u003e\n\u003cli\u003eSmall set: TX27 and TX27 MAX rear\u003c\/li\u003e\n\u003cli\u003eIncluded: cutting guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Large Set - AX27\/DX27\/LX27 \u0026 LX27 Gen 2\/TX27 \u0026 TX27 MAX Front Only","offer_id":41429315125310,"sku":"4RTUSRLS","price":95.0,"currency_code":"AUD","in_stock":true},{"title":"Small Set - TX27 \u0026 TX27 MAX Rear Only","offer_id":41429315158078,"sku":"4RTUSRSS","price":80.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTUSRLS-UniversalSpringRodLargeSet-AX27.jpg?v=1774252691"},{"product_id":"strap-hook-bracket","title":"Strap Hook Bracket","description":"\u003ch3\u003eStrap Hook Bracket\u003c\/h3\u003e\n\u003cp\u003eWhen you set up one of our awnings, the tension straps on the outer arms are secured to the vehicle to tension the canvas. The Strap Hook Bracket gives the \u003cstrong\u003eawning tension strap\u003c\/strong\u003e a secure hook point, mounted on a rooftop tent or on a roof rack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOn a rooftop tent, it bolts into an Ezi-Slot channel with the supplied stainless steel M8 bolts and nyloc nuts. No drilling.\u003c\/li\u003e\n\u003cli\u003eFits all Bush Company tent models, and can also be mounted to a roof rack.\u003c\/li\u003e\n\u003cli\u003eLow profile, so it doesn't get in the way of the tent opening and closing.\u003c\/li\u003e\n\u003cli\u003eStainless steel with a black powder coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUse: anchor point for an awning tension strap\u003c\/li\u003e\n\u003cli\u003eMounting: rooftop tent Ezi-Slot channel or roof rack\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel M8 bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eFits: all Bush Company rooftop tent models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429315190846,"sku":"4RTSHB","price":28.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTSHBStrapHookBracket.jpg?v=1774250082"},{"product_id":"bottle-opener-universal","title":"Bottle Opener Universal","description":"\u003ch3\u003eBottle Opener for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eEvery camp needs one, and it's never in the drawer you look in first. This stainless steel opener bolts into an Ezi-Slot channel on your Bush Company rooftop tent, so it stays put.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolts on with the supplied stainless steel M8 pan head bolts and nyloc nuts; no drilling.\u003c\/li\u003e\n\u003cli\u003eCompact, at about 5 × 5 × 5cm, so it fits alongside other Ezi-Slot accessories.\u003c\/li\u003e\n\u003cli\u003eStainless steel with a black powder coat to match the rest of your setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSize: about 5 × 5 × 5cm\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel M8 bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eMounting: any Ezi-Slot channel; fits all Bush Company rooftop tents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429315256382,"sku":"4RTUBO","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTUBOBottleOpener2.jpg?v=1774249555"},{"product_id":"solar-panels","title":"Solar Panels","description":"\u003ch3\u003eSolar panels for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eThe roof of a closed hard shell tent is wasted space for most of the trip. Put a panel on it and the tent keeps your batteries topped up while you drive and while you're at camp. These monocrystalline PERC panels (up to 22.5% cell efficiency) are sized to fit the roofs of our tents.\u003c\/p\u003e\n\u003ch4\u003eChoosing a panel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W Lightweight:\u003c\/strong\u003e 1250 × 785 × 25mm, 5.4kg. A flexible polymer face with no glass, on a light 25mm black aluminium frame with two strengthening gussets. Fits sideways on all our tents, up to two per tent, with one bracket set per panel. Clean it with water only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e215W:\u003c\/strong\u003e 1300 × 820 × 35mm, 13.4kg. Toughened glass and a 35mm black frame; the largest panel in the range. Fits lengthways, one per tent; the \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e takes two mounted sideways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W:\u003c\/strong\u003e 1455 × 666 × 35mm, 12.5kg. Toughened glass and a 35mm anodised black frame. Fits lengthways. Two can sit side by side on a single set of solar panel brackets, glued and riveted or bolted along the joining edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W:\u003c\/strong\u003e 1105 × 666 × 35mm, 7.8kg. Toughened glass and a 35mm anodised black frame. Fits sideways, one bracket set per panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMounting and wiring\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMount the panel with the \u003ca href=\"\/products\/solar-panel-bracket\"\u003eSolar Panel Bracket\u003c\/a\u003e, which bolts into the tent's Ezi-Slot channels and leaves an air gap under the panel, or with the \u003ca href=\"\/products\/solar-panel-to-load-bar-bracket-set\"\u003eSolar Panel To Load Bar Bracket Set\u003c\/a\u003e on load bars. On the \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e, mount it on \u003ca href=\"\/products\/rooftop-tent-load-bars\"\u003eRooftop Tent Load Bars\u003c\/a\u003e with High Foot Mounts; on the LX27 Gen 1, on the \u003ca href=\"\/products\/adjustable-load-bar\"\u003eAdjustable Load Bar\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eEach panel has IP67-rated MC4 connectors fitted. We supply a connector lead with MC4 connectors at one end and a red Anderson plug at the other, to connect the panel to your system.\u003c\/li\u003e\n\u003cli\u003eRunning two panels? Join them with a \u003ca href=\"\/products\/solar-y-connector-pair\"\u003eSolar Y Connector Pair\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eProtect the cable where it crosses the hinge with a \u003ca href=\"\/products\/solar-cable-protector\"\u003eSolar Cable Protector\u003c\/a\u003e (AX27, DX27 and LX27 models).\u003c\/li\u003e\n\u003cli\u003eUse a solar regulator to control charging into your battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight matters on the roof. As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eElectrical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e200W Lightweight: Vmp 17.43V, Imp 11.47A, Voc 19.92V, Isc 11.82A\u003c\/li\u003e\n\u003cli\u003e215W: Vmp 18.2V, Imp 11.81A, Voc 21.5V, Isc 13.07A\u003c\/li\u003e\n\u003cli\u003e180W: Vmp 19.5V, Imp 9.23A, Voc 23.0V, Isc 10.23A\u003c\/li\u003e\n\u003cli\u003e140W: Vmp 17.5V, Imp 8.01A, Voc 22.3V, Isc 8.06A\u003c\/li\u003e\n\u003cli\u003eMaximum system voltage: 1000V DC (all models)\u003c\/li\u003e\n\u003cli\u003eWarranty: 1-year workmanship, 10-year output performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"200W Lightweight","offer_id":41429324595262,"sku":"CT-LW200","price":429.45,"currency_code":"AUD","in_stock":true},{"title":"215W","offer_id":42544672735294,"sku":"CT-215B","price":350.0,"currency_code":"AUD","in_stock":true},{"title":"180W","offer_id":42544672768062,"sku":"CT-180B","price":334.0,"currency_code":"AUD","in_stock":true},{"title":"140W","offer_id":42544672800830,"sku":"CT-140B","price":264.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/200-watt-light-weight-solar-panel-600x600-1.jpg?v=1744942330"},{"product_id":"led-tricolour-rechargeable-light","title":"LED Tricolour Rechargeable Light","description":"\u003ch3\u003eLED Tricolour Rechargeable Light\u003c\/h3\u003e\n\u003cp\u003eThis is the movable tri-colour light supplied with the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e and the LX27 Gen 1. Add a second one for the other end of the tent, or replace one that's gone walkabout.\u003c\/p\u003e\n\u003ch4\u003eThree colours\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite:\u003c\/strong\u003e general light for reading, packing and getting changed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmber:\u003c\/strong\u003e a softer, low-glare light for the evening that keeps the bugs down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed:\u003c\/strong\u003e keeps your night vision for a late check outside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMount it or carry it\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA magnetic strip and Velcro attach it inside the tent.\u003c\/li\u003e\n\u003cli\u003eMicro-magnets let you take it down and use it as a handheld torch.\u003c\/li\u003e\n\u003cli\u003eIt runs on a rechargeable lithium battery, charged by the USB cable supplied. No disposable batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn the \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e, it can sit on the face plate of the \u003ca href=\"\/products\/sirocco-12v-fan-mount-plate\"\u003eSirocco 12V Fan Mount Plate\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eColours: white, amber and red\u003c\/li\u003e\n\u003cli\u003ePower: rechargeable lithium battery, USB charging (cable included)\u003c\/li\u003e\n\u003cli\u003eMounting: magnetic strip and Velcro; detaches for handheld use\u003c\/li\u003e\n\u003cli\u003eSupplied with: AX27, TX27, TX27 MAX and LX27 Gen 1 rooftop tents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429325545534,"sku":"4RTTLRL","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/AX27-Clamshell-Rooftop-Tent-LED-light_fdcc655c-95a3-47b1-b28c-7fe6a19930c9.jpg?v=1748155710"},{"product_id":"ladder-mount-bracket","title":"Ladder Mount Bracket","description":"\u003ch3\u003eLadder Mount Bracket for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eThis is the bracket that holds the top of your telescopic ladder. Every Bush Company tent comes with two, one pre-mounted at the open end and one you can fit to either side. Buy another to give yourself a third climbing position, or to replace one.\u003c\/p\u003e\n\u003ch4\u003eTwo versions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAX27, DX27, TX27\/MAX:\u003c\/strong\u003e the double-bolt bracket for the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e and DX27.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLX27:\u003c\/strong\u003e a smaller bracket for the LX27 Gen 1 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBolts into the tent's Ezi-Slot channels with the supplied stainless steel M8 bolts and nyloc nuts. No drilling.\u003c\/li\u003e\n\u003cli\u003eTakes the \u003ca href=\"\/products\/ladder-mount-plate-deluxe-or-compact-ladder\"\u003eLadder Mount Plate\u003c\/a\u003e on the \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/deluxe-telescopic-ladder\"\u003eDeluxe\u003c\/a\u003e or \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/compact-telescopic-ladder\"\u003eCompact\u003c\/a\u003e Telescopic Ladder.\u003c\/li\u003e\n\u003cli\u003eTo mount it on a roof rack instead, use the \u003ca href=\"\/products\/lightbar-bracket-set\"\u003eLightbar Bracket Set\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor extra clearance past a wide canopy or rear bar, see the \u003ca href=\"\/products\/wide-ladder-mount-bracket\"\u003eWide Ladder Mount Bracket\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel M8 bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eVersions: AX27, DX27, TX27 and TX27 MAX (double-bolt); LX27 Gen 1 and LX27 Gen 2 (small)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Ladder Mount- AX27, DX27, TX27\/MAX","offer_id":41429326626878,"sku":"4RTLMB","price":73.0,"currency_code":"AUD","in_stock":true},{"title":"Ladder Mount - LX27","offer_id":41429326692414,"sku":"4RTLMBS","price":73.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTLMB-LadderMountingBracket-totent.jpg?v=1774235051"},{"product_id":"mattress-and-cover","title":"Mattress and Cover","description":"\u003ch3\u003eMattress and Cover for the AX27, TX27 and DX27\u003c\/h3\u003e\n\u003cp\u003eThis is the factory mattress for the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and DX27. Use it to replace a worn mattress, or keep a spare for a second tent.\u003c\/p\u003e\n\u003ch4\u003eComfort that lasts\u003c\/h4\u003e\n\u003cp\u003eThe 80mm mattress has \u003cstrong\u003e40mm of medium-density foam on top for comfort, over a 40mm high-density foam base\u003c\/strong\u003e that gives a firm foundation and resists bottoming out, even with two adults on it.\u003c\/p\u003e\n\u003ch4\u003eFit and care\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCut to the tent at \u003cstrong\u003e2.13m long × 1.28m wide\u003c\/strong\u003e, so it covers the floor without sliding or bunching.\u003c\/li\u003e\n\u003cli\u003eThe removable zippered ripstop canvas cover is mould and abrasion resistant and protects the foam from dust, sand and sweat. Unzip it and machine wash it when it needs it.\u003c\/li\u003e\n\u003cli\u003eIt stays inside the closed tent with your bedding, sheets and sleeping bags.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the TX27 MAX, see the \u003ca href=\"\/products\/mattress-and-cover-tx27-max\"\u003eMattress and Cover TX27 MAX\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 2.13m long × 1.28m wide × 80mm thick\u003c\/li\u003e\n\u003cli\u003eFoam: 40mm medium-density top layer over a 40mm high-density base\u003c\/li\u003e\n\u003cli\u003eWeight: 8kg\u003c\/li\u003e\n\u003cli\u003eCover: removable, zippered ripstop canvas; machine washable; mould and abrasion resistant\u003c\/li\u003e\n\u003cli\u003eFits: AX27, TX27 and DX27\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429326790718,"sku":"4RTM","price":425.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/AX27-Clamshell-Rooftop-Tent-mattress_23c06468-0975-4348-8fa7-1350bef14bb0.jpg?v=1748155710"},{"product_id":"deluxe-telescopic-ladder","title":"Deluxe Telescopic Ladder - Wide, Angled Steps","description":"\u003ch3\u003eDeluxe Telescopic Ladder: wide, angled steps for rooftop tents\u003c\/h3\u003e\n\u003cp\u003eYou climb your tent ladder every night and every morning, often barefoot, sometimes in the rain. The Deluxe Telescopic Ladder has \u003cstrong\u003ewide 75mm angled steps\u003c\/strong\u003e that sit flatter under your feet than round rungs, so it's more comfortable and more secure. It's the ladder supplied with the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e rooftop tents.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine angled steps\u003c\/strong\u003e, 75mm wide, at 300mm spacing, so you can set the height to suit your vehicle and uneven ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach step locks individually\u003c\/strong\u003e as the ladder extends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach:\u003c\/strong\u003e extends to 2.6m; collapses to 76cm (83.5cm with the mount plate fitted).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking load limit:\u003c\/strong\u003e 150kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanvas storage bag\u003c\/strong\u003e included, to keep sand and dirt off the tent and vehicle when it's stowed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitting it to your tent\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWhen it comes with a tent, the ladder has the mount plate already fitted. A spare ladder bought on its own needs the \u003ca href=\"\/products\/ladder-mount-plate-deluxe-or-compact-ladder\"\u003eLadder Mount Plate\u003c\/a\u003e (sold separately) on its top step. The plate from our older standard ladder doesn't fit, because the steps are wider.\u003c\/li\u003e\n\u003cli\u003eThe plate hooks onto the double-bolt \u003ca href=\"\/products\/ladder-mount-bracket\"\u003eLadder Mount Bracket\u003c\/a\u003e on the tent; our tents come with two, one at the open end and one for either side.\u003c\/li\u003e\n\u003cli\u003eFor wide canopies or rear bars, the \u003ca href=\"\/products\/wide-ladder-mount-bracket\"\u003eWide Ladder Mount Bracket\u003c\/a\u003e stands the ladder further out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtended length: 2.6m\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 76cm; 83.5cm with the mount plate\u003c\/li\u003e\n\u003cli\u003eSteps: nine, angled, 75mm wide, 300mm spacing\u003c\/li\u003e\n\u003cli\u003eWorking load limit: 150kg\u003c\/li\u003e\n\u003cli\u003eWeight: 7.8kg without the mount plate\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium alloy, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: canvas storage bag (mount plate sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429327085630,"sku":"4RTDL","price":275.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Deluxe-Telescopic-Ladder-10.jpg?v=1748399615"},{"product_id":"rooftop-tent-latch-set","title":"Rooftop Tent Bottom Latch Large Set","description":"\u003ch3\u003eRooftop Tent Bottom Latch Large Set\u003c\/h3\u003e\n\u003cp\u003eOur tents close on our own \u003cstrong\u003ecustom-made, heavy-duty over-centre latches, made from stainless steel\u003c\/strong\u003e. They pull the shell down hard onto the rubber seals so the tent stays dust free and watertight on the road, and they have \u003cstrong\u003eholes for a padlock\u003c\/strong\u003e so you can lock it. This set replaces two of the bottom latches.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDX27\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the LX27 Gen 1 and Gen 2, see the \u003ca href=\"\/products\/rooftop-tent-bottom-latch-small-set-lx27\"\u003eRooftop Tent Bottom Latch Small Set – LX27\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNeed extra security when the tent is reversed on the vehicle? See the \u003ca href=\"\/products\/rooftop-tent-dead-bolt-bracket\"\u003eRooftop Tent Dead Bolt Bracket\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two complete bottom latches with mounting bolts\u003c\/li\u003e\n\u003cli\u003eMounting: bolts to the tent's Ezi-Slot extruded channels\u003c\/li\u003e\n\u003cli\u003eType: over-centre latch with padlock hole\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, black powder coat\u003c\/li\u003e\n\u003cli\u003eFits: AX27, TX27, TX27 MAX and DX27\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429327151166,"sku":"4RTTBLLS","price":173.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTTBLLSRooftopTentlatchSet.jpg?v=1774219700"},{"product_id":"rooftop-tent-hd-hinge-set","title":"Rooftop Tent HD Hinge Set- Large","description":"\u003ch3\u003eRooftop Tent HD Hinge Set – Large\u003c\/h3\u003e\n\u003cp\u003eThe hinges carry the shell every time you open and close the tent. If one gets bent, from a branch or a heavy load, the shell can close out of square and stop sealing properly. This set gives you \u003cstrong\u003efour heavy-duty stainless steel hinges\u003c\/strong\u003e, a full replacement for the tent.\u003c\/p\u003e\n\u003ch4\u003eFits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e: the hinges on the bottom section of the double-action roof\u003c\/li\u003e\n\u003cli\u003eDX27\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the LX27, see the \u003ca href=\"\/products\/rooftop-tent-hd-hinge-set-lx27\"\u003eRooftop Tent HD Hinge Set – LX27\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: four heavy-duty hinges\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, black and red powder coat\u003c\/li\u003e\n\u003cli\u003eFits: AX27 and DX27; bottom section of the TX27 and TX27 MAX\u003c\/li\u003e\n\u003cli\u003eFitting: direct replacement on the original mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429327183934,"sku":"4RTTHDHS","price":225.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTTHSRooftopTentHingeSet3.jpg?v=1774150365"},{"product_id":"rooftop-tent-universal-fitment-set","title":"Rooftop Tent Universal Fitment Set","description":"\u003ch3\u003eRooftop Tent Universal Fitment Set: six brackets to mount your tent\u003c\/h3\u003e\n\u003cp\u003eThis is the fitment set supplied as standard with the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e and \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e rooftop tents, and it also suits the earlier DX27: \u003cstrong\u003esix complete brackets, three for each side of the tent\u003c\/strong\u003e. Order a second set if you want extra mounting points on a long rack or canopy, or need to replace a set.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL bracket:\u003c\/strong\u003e bolts to the side of the mounting rails underneath the tent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp plate:\u003c\/strong\u003e a folded long plate that sits under your load bar and pulls up against the L bracket with the supplied long bolts, clamping the tent to the bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e a comprehensive set of stainless steel nuts, bolts and washers comes with the brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse the clamp plates where your load bars allow it, or bolt the L brackets straight to bars or tracks with suitable channels.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e uses its own set of six fitment brackets that mount to the side of its foot rails, so this set isn't needed for that tent.\u003c\/p\u003e\n\u003ch4\u003eBefore you fit it\u003c\/h4\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. If you're not sure which mounting option suits your vehicle, see our \u003ca href=\"\/collections\/rooftop-tent-fitment-solutions\"\u003erooftop tent fitment solutions\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: six fitment brackets (three per side), each an L bracket and a folded long clamp plate\u003c\/li\u003e\n\u003cli\u003eMaterial: 2.5mm stainless steel, black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel nuts, bolts and washers, including long bolts for the clamp plates\u003c\/li\u003e\n\u003cli\u003eSupplied as standard with: AX27, TX27 and TX27 MAX rooftop tents; also suits the DX27\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429327216702,"sku":"4RTUFB","price":135.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTUFB-Rooftop-Tent-Universal-Fitment-Brackets.jpg?v=1748155710"},{"product_id":"ax27-tent-large-rainfly-set","title":"AX27 Tent Large Rainfly Set","description":"\u003ch3\u003eAX27 Tent Large Rainfly Set\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e comes with a one-piece rainfly over its entrances. This larger rainfly is an upgrade for campers who spend time on exposed sites: it gives \u003cstrong\u003emore coverage down the sides of the tent\u003c\/strong\u003e and is tensioned to cut down the flapping noise that keeps you awake in the wind.\u003c\/p\u003e\n\u003ch4\u003eWhy a bigger rainfly helps\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry entry and exit:\u003c\/strong\u003e it covers the ladder and entrances, so you're not climbing in wet or bringing water inside.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore weather protection:\u003c\/strong\u003e wider side coverage keeps rain off more of the main canvas and doorways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow in wet weather:\u003c\/strong\u003e you can leave windows and vents cracked open without rain splashing in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e more of the tent sits in shade on hot afternoons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuieter:\u003c\/strong\u003e reinforced tensioning points reduce flapping in gusts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAttaches to the AX27's pre-mounted side brackets.\u003c\/li\u003e\n\u003cli\u003eUses your existing 8mm spring steel poles plus \u003cstrong\u003etwo shorter poles included\u003c\/strong\u003e in the set.\u003c\/li\u003e\n\u003cli\u003eVelcro tabs hold the rainfly in place when you close the tent, so it doesn't get caught in the seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFabric: single-layer 315gsm ±5% acrylic-treated polyester ripstop canvas\u003c\/li\u003e\n\u003cli\u003eFits: AX27 Clamshell Rooftop Tent\u003c\/li\u003e\n\u003cli\u003eIncluded: rainfly and two shorter spring steel poles\u003c\/li\u003e\n\u003cli\u003eMounting: AX27 pre-mounted side brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328625726,"sku":"4RTATLRF","price":404.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTATLRF-AX27-Tent-Large-Rainfly-Set-2.jpg?v=1748155710"},{"product_id":"outhouse-shower-tent","title":"Outhouse Shower Tent","description":"\u003ch3\u003eOuthouse Shower Tent: privacy that lives on the vehicle\u003c\/h3\u003e\n\u003cp\u003eA shower tent is one more thing to pitch, peg and pack wet. The Outhouse lives in a heavy-duty PVC bag on your roof rack, load bars or the side of your rooftop tent. Unzip the bag and it \u003cstrong\u003edrops down beside the vehicle\u003c\/strong\u003e, ready to use as a shower, a toilet tent or a privacy room for getting changed, with the roof already in place.\u003c\/p\u003e\n\u003ch4\u003eSize\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame when open:\u003c\/strong\u003e 1110mm × 1042mm, so about 1.1m × 1.0m of floor space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor:\u003c\/strong\u003e swings out from the frame; allow about 1.9m from the mounting edge with the door open.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e adjustable up to 2.6m with the webbing straps, to suit your vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanvas:\u003c\/strong\u003e 260gsm acrylic-treated polyester ripstop canvas, mould and mildew resistant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-out door\u003c\/strong\u003e for easy access, plus a large rear access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable drop height:\u003c\/strong\u003e a built-in canvas roof and adjustable webbing straps set the height to suit your 4WD, ute, trailer or camper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor:\u003c\/strong\u003e a separate heavy-duty PVC floor with built-in drain holes, so water runs out rather than pooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e two movable pockets for shampoo, soap and toiletries; mesh window for airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYKK zips\u003c\/strong\u003e on the entrance and the bag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacks away\u003c\/strong\u003e into its heavy-duty PVC bag on a frame that folds to 1110 × 144 × 134mm; 20kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMounting it\u003c\/h4\u003e\n\u003cp\u003eThe brackets aren't included, so choose the one for your setup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof rack or load bars:\u003c\/strong\u003e the \u003ca href=\"\/products\/low-profile-l-bracket\"\u003eLow Profile L Bracket\u003c\/a\u003e (pair).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of a Bush Company rooftop tent:\u003c\/strong\u003e the \u003ca href=\"\/products\/outhouse-to-tent-bracket-set\"\u003eAccessory To Tent Bracket Set – Outhouse\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe frame has 980mm of mounting surface with M8 mounting slots at a 73.5mm pitch. Always position the centre of the Outhouse frame centrally between the bracket sets for even load support.\u003c\/p\u003e\n\u003cp\u003eFitting instructions are on our \u003ca href=\"\/pages\/guides-and-instructions\"\u003eguides and instructions\u003c\/a\u003e page, and the Outhouse Fitment tab. The Bush Company or one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e can fit it for you. If you fit it yourself, check that your installation doesn't create any safety issues.\u003c\/p\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCanvas: 260gsm acrylic-treated polyester ripstop, mould and mildew resistant\u003c\/li\u003e\n\u003cli\u003eFloor: separate heavy-duty PVC with drain holes\u003c\/li\u003e\n\u003cli\u003eAccess: swing-out door and large rear access\u003c\/li\u003e\n\u003cli\u003eFrame size when open: 1110 × 1042mm\u003c\/li\u003e\n\u003cli\u003eHeight: adjustable up to 2.6m with webbing straps\u003c\/li\u003e\n\u003cli\u003eZips: YKK on the entrance and bag\u003c\/li\u003e\n\u003cli\u003eFolded frame: 1110 × 144 × 134mm, in a heavy-duty PVC bag\u003c\/li\u003e\n\u003cli\u003eMounting: 980mm mounting surface, M8 slots at 73.5mm pitch\u003c\/li\u003e\n\u003cli\u003eWeight: 20kg\u003c\/li\u003e\n\u003cli\u003eMounting brackets: sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328756798,"sku":"4AOH","price":1150.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4AOH_Outhouse_-_shower_toilet_change_room_4.jpg?v=1764211441"},{"product_id":"outhouse-to-tent-bracket-set","title":"Accessory To Tent Bracket Set - Outhouse","description":"\u003ch3\u003eAccessory To Tent Bracket Set – Outhouse\u003c\/h3\u003e\n\u003cp\u003eMount the \u003ca href=\"\/products\/outhouse-shower-tent\"\u003eOuthouse Shower Tent\u003c\/a\u003e on the side of your Bush Company rooftop tent with this bracket set. It bolts into the tent's Ezi-Slot channels, so there's no drilling, and keeps the Outhouse up with the tent and off your rack.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable bolt pitch\u003c\/strong\u003e from 46mm to 60mm, to line up with the channels and the Outhouse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e147mm height\u003c\/strong\u003e, giving the Outhouse clearance to drop cleanly.\u003c\/li\u003e\n\u003cli\u003eCNC laser-cut stainless steel with a powder-coat finish.\u003c\/li\u003e\n\u003cli\u003eStainless steel bolts and nyloc nuts included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMounting to a roof rack or load bars instead? Use the \u003ca href=\"\/products\/low-profile-l-bracket\"\u003eLow Profile L Bracket\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pitch: adjustable, 46–60mm\u003c\/li\u003e\n\u003cli\u003eHeight: 147mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC laser-cut stainless steel, powder coat\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eSold as: pair\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot channels on Bush Company rooftop tents\u003c\/li\u003e\n\u003cli\u003eFits: all Bush Company tents except the earlier Classic and Black Series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328822334,"sku":"4RTATTB","price":115.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTATTB-AccessorytotentBracketSet-Outhouse2.jpg?v=1764221972"},{"product_id":"awning-to-tent-bracket-4-piece","title":"Awning To Tent Bracket 4 Piece - LX27","description":"\u003ch3\u003eAwning To Tent Bracket 4 Piece for the LX27\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e is our lightest tent, but it's built to carry any of our \u003ca href=\"\/collections\/awnings\"\u003efreestanding awnings\u003c\/a\u003e. This four-piece bracket set is how: it bolts into the tent's Ezi-Slot channels and holds the awning on the side of the tent, with no drilling or modification.\u003c\/p\u003e\n\u003ch4\u003eFitting notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMount the awning on the \u003cstrong\u003eleft or right\u003c\/strong\u003e side.\u003c\/li\u003e\n\u003cli\u003eTwo side brackets carry the awning, and two reinforced corner plates spread the weight and twist of a large awning over corrugations.\u003c\/li\u003e\n\u003cli\u003eRated for awnings up to 40kg.\u003c\/li\u003e\n\u003cli\u003eIf the awning bracket has to point upwards on your vehicle, add the \u003ca href=\"\/products\/spring-rod-adapter\"\u003eSpring Rod Adapter\u003c\/a\u003e so the rainfly pole clears the awning, rather than bending a dog-leg into the pole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. The LX27 Gen 2 is rated to 100kg dynamic when closed.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two side brackets, two corner plates, stainless steel bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eRating: awnings up to 40kg\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot channels, left or right side\u003c\/li\u003e\n\u003cli\u003eFits: LX27 Gen 1 and LX27 Gen 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the AX27, TX27, TX27 MAX and DX27, see the \u003ca href=\"\/products\/awning-to-tent-bracket-4-piece-ax27-tx27-max-dx27\"\u003eAwning To Tent Bracket 4 Piece\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328855102,"sku":"4RTAABL","price":326.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTAABL-AwningToTentBracket4Piece-installed5.jpg?v=1760402317"},{"product_id":"adjustable-load-bar","title":"Adjustable Load Bar","description":"\u003ch3\u003eAdjustable Load Bar for the LX27 Gen 1\u003c\/h3\u003e\n\u003cp\u003eThe original LX27 (Gen 1) has channels along the sides of its roof, and this load bar mounts to them to turn the closed tent into a carrying platform. Use it for \u003ca href=\"\/products\/solar-panels\"\u003esolar panels\u003c\/a\u003e, recovery gear, a kayak or boards.\u003c\/p\u003e\n\u003ch4\u003eTwo heights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e37mm:\u003c\/strong\u003e keeps the profile low for slimline panels and flat gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e66mm:\u003c\/strong\u003e more clearance and airflow under a solar panel, which helps it run cooler and produce more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated aluminium with stainless steel hardware.\u003c\/li\u003e\n\u003cli\u003eMounts to the \u003cstrong\u003eside channels in the roof\u003c\/strong\u003e of the LX27 Gen 1, pre-drilled for straightforward fitting; no drilling into the tent.\u003c\/li\u003e\n\u003cli\u003eRated to \u003cstrong\u003e100kg dynamic\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold singly\u003c\/strong\u003e, so you don't have to buy pairs when you need more than two.\u003c\/li\u003e\n\u003cli\u003ePairs with the \u003ca href=\"\/products\/solar-panel-to-load-bar-bracket-set\"\u003eSolar Panel To Load Bar Bracket Set\u003c\/a\u003e for mounting a panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis bar only fits the LX27 Gen 1. For the \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e, use our \u003ca href=\"\/products\/rooftop-tent-load-bars\"\u003eRooftop Tent Load Bars\u003c\/a\u003e with the \u003ca href=\"\/products\/load-bar-high-foot-mount\"\u003eLoad Bar High Foot Mount\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 1390mm\u003c\/li\u003e\n\u003cli\u003eHeight settings: 37mm or 66mm\u003c\/li\u003e\n\u003cli\u003eRating: 100kg dynamic, subject to the tent, rack and vehicle ratings\u003c\/li\u003e\n\u003cli\u003eMaterial: powder-coated aluminium, stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMounting: side channels in the roof of the tent\u003c\/li\u003e\n\u003cli\u003eSold as: single bar\u003c\/li\u003e\n\u003cli\u003eFits: LX27 Gen 1 rooftop tent only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328887870,"sku":"4RTALB1390","price":185.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTALB1390-Adjustable-Load-Bar-1390-4.jpg?v=1731646489"},{"product_id":"solar-panel-to-load-bar-bracket-set","title":"Solar Panel To Load Bar Bracket Set","description":"\u003ch3\u003eSolar Panel To Load Bar Bracket Set\u003c\/h3\u003e\n\u003cp\u003eIf you're running load bars on your tent, these four brackets fix a \u003ca href=\"\/products\/solar-panels\"\u003esolar panel\u003c\/a\u003e to them, leaving the rest of the bar free for other gear.\u003c\/p\u003e\n\u003ch4\u003eWhich load bars?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/adjustable-load-bar\"\u003eAdjustable Load Bar\u003c\/a\u003e on the LX27 Gen 1.\u003c\/li\u003e\n\u003cli\u003eOur \u003ca href=\"\/products\/rooftop-tent-load-bars\"\u003eRooftop Tent Load Bars\u003c\/a\u003e, with the \u003ca href=\"\/products\/load-bar-high-foot-mount\"\u003eLoad Bar High Foot Mount\u003c\/a\u003e fitted for clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBuilt for the track\u003c\/h4\u003e\n\u003cp\u003eThe brackets are stainless steel with a black powder coat, for coastal salt and dust, and are rated to 20kg each. They hold the panel flat (they don't tilt). Bolted to the panel frame and the bar, they hold the panel firm over corrugations and rough tracks.\u003c\/p\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: four brackets with mounting hardware\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, black powder coat\u003c\/li\u003e\n\u003cli\u003eRating: 20kg per bracket\u003c\/li\u003e\n\u003cli\u003ePanel angle: flat (no tilt)\u003c\/li\u003e\n\u003cli\u003eSuits: Adjustable Load Bar; Rooftop Tent Load Bars with High Foot Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328920638,"sku":"4RTSPLB","price":131.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTSPLB-Solar-Panel-To-Load-Bar-Bracket-Set-4.jpg?v=1731646500"},{"product_id":"heavy-duty-load-bar","title":"Heavy Duty Load Bar","description":"\u003ch3\u003eHeavy Duty Load Bar for canopy roofs\u003c\/h3\u003e\n\u003cp\u003eThe Heavy Duty Load Bar carries a rooftop tent, recovery gear or other kit across the roof of a canopy. Made from \u003cstrong\u003ehigh-strength stainless steel\u003c\/strong\u003e and rated to \u003cstrong\u003e150kg\u003c\/strong\u003e, it's the bar we recommend for mounting a rooftop tent on a canopy. It fits \u003ca href=\"\/collections\/alloy-canopies\"\u003eCapRax by Rhinoman\u003c\/a\u003e Xpedition and Xtreme canopies perfectly, and suits any canopy with \u003cstrong\u003elongitudinal rails or unistrut channels spaced no more than 1043mm apart\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch4\u003eMade to suit our tents\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile:\u003c\/strong\u003e the bar is just 28mm high.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable length:\u003c\/strong\u003e the ends adjust to give 1170mm to 1224mm between the end caps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTent-ready end caps:\u003c\/strong\u003e slotted to attach directly to the mounting rails on Bush Company rooftop tents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTie-down points:\u003c\/strong\u003e slots along the bar take eye bolts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold singly\u003c\/strong\u003e, so you can choose how many bars your setup needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBefore you fit it\u003c\/h4\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. Your canopy's roof rating applies too: CapRax canopies are rated to 250kg dynamic and 500kg static.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: high-strength stainless steel\u003c\/li\u003e\n\u003cli\u003eLoad rating: 150kg\u003c\/li\u003e\n\u003cli\u003eHeight: 28mm\u003c\/li\u003e\n\u003cli\u003eLength between end caps: 1170mm to 1224mm, adjustable\u003c\/li\u003e\n\u003cli\u003eCanopy rail or channel spacing: up to 1043mm\u003c\/li\u003e\n\u003cli\u003eEnd caps: slotted for Bush Company rooftop tent mounting rails\u003c\/li\u003e\n\u003cli\u003eSold as: single bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328953406,"sku":"4RTHDLB","price":253.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/DSC00435.jpg?v=1752014429"},{"product_id":"sirocco-12v-fan-mount-plate","title":"Sirocco 12V Fan Mount Plate","description":"\u003ch3\u003eSirocco 12V Fan Mount Plate for the LX27\u003c\/h3\u003e\n\u003cp\u003eThe LX27 is built ready for a fan. One of the internal beams that reinforce the roof has \u003cstrong\u003epre-fitted rivnuts\u003c\/strong\u003e, and this plate bolts straight onto them, giving your \u003ca href=\"\/products\/sirocco-12v-fan\"\u003eSirocco II fan\u003c\/a\u003e a fixed mount above the bed. There's no drilling and nothing to modify. It fits both the LX27 Gen 1 and the \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits inside the tent on the pre-fitted rivnuts in the roof beam.\u003c\/li\u003e\n\u003cli\u003eHolds the fan steady over corrugations, without rattles.\u003c\/li\u003e\n\u003cli\u003eA face plate holds the magnetic tri-colour light supplied with the LX27 Gen 1. It's the same light as our \u003ca href=\"\/products\/led-tricolour-rechargeable-light\"\u003eLED Tricolour Rechargeable Light\u003c\/a\u003e, which you can buy separately for the Gen 2.\u003c\/li\u003e\n\u003cli\u003eStainless steel with a black powder coat; slim enough to sit alongside the roof pouches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRun the fan cable up the zippered cable channels inside the roof to the tent's 12V sockets.\u003c\/p\u003e\n\u003cp\u003eFor the AX27, TX27 and TX27 MAX, use the \u003ca href=\"\/products\/sirocco-12v-fan-bracket\"\u003eSirocco 12V Fan Bracket\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eMounting: pre-fitted rivnuts in an internal roof beam, no drilling\u003c\/li\u003e\n\u003cli\u003eIncludes: face plate for the magnetic tri-colour light\u003c\/li\u003e\n\u003cli\u003eFits: LX27 Gen 1 and LX27 Gen 2 rooftop tents\u003c\/li\u003e\n\u003cli\u003eFan: Sirocco II, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429328986174,"sku":"4RTASFMP","price":65.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Sirocco12VFanMountPlate7.jpg?v=1750090509"},{"product_id":"solar-y-connector-pair","title":"Solar Y Connector Pair","description":"\u003ch3\u003eSolar Y Connector Pair: run two panels as one\u003c\/h3\u003e\n\u003cp\u003eAdding a second \u003ca href=\"\/products\/solar-panels\"\u003esolar panel\u003c\/a\u003e to your tent or canopy? This pair of MC4 Y connectors joins the two panels \u003cstrong\u003ein parallel\u003c\/strong\u003e, so their current adds together while the voltage stays the same as a single panel.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne connector joins the two positive leads, the other the two negatives.\u003c\/li\u003e\n\u003cli\u003eThey plug straight into standard MC4 connectors: no crimping, cutting or tools.\u003c\/li\u003e\n\u003cli\u003eThe single output then runs to your solar regulator as before.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure your regulator and cabling are rated for the combined current of both panels. The connectors are rated to \u003cstrong\u003e30A\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: one pair of MC4 Y-branch connectors (positive and negative)\u003c\/li\u003e\n\u003cli\u003eRating: 30A\u003c\/li\u003e\n\u003cli\u003eConnection: MC4, two in, one out\u003c\/li\u003e\n\u003cli\u003eIngress protection: IP67 (dust-tight; temporary immersion to 1m for 30 minutes)\u003c\/li\u003e\n\u003cli\u003eUse: parallel connection of two solar panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41429329051710,"sku":"CT-CY","price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Solar-Y-Connector-Pair.jpg?v=1748155709"},{"product_id":"solar-cable-protector","title":"Solar Cable Protector","description":"\u003ch3\u003eSolar Cable Protector for rooftop tents\u003c\/h3\u003e\n\u003cp\u003eIf you run a \u003ca href=\"\/products\/solar-panels\"\u003esolar panel\u003c\/a\u003e on your tent, the cable has to get from the roof down to the vehicle somewhere. At the hinge end it's exposed to branches, scrub and grit. The Solar Cable Protector covers it there and keeps it neatly routed along the hinge line.\u003c\/p\u003e\n\u003ch4\u003eTwo models\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge:\u003c\/strong\u003e \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e and DX27.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall:\u003c\/strong\u003e LX27 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe TX27 and TX27 MAX don't use a solar cable protector.\u003c\/p\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cp\u003eIt mounts on the hinge side of the tent using the tent's existing hardware, with no drilling or adhesive, and doesn't interfere with opening or closing the tent.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel, black powder coat\u003c\/li\u003e\n\u003cli\u003eMounting: hinge end of the tent, using existing hardware\u003c\/li\u003e\n\u003cli\u003eModels: Large (AX27, DX27); Small (LX27, LX27 Gen 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"LARGE Model - AX27\/DX27","offer_id":43576232083518,"sku":"4RTSCP","price":50.4,"currency_code":"AUD","in_stock":true},{"title":"SMALL Model - LX27\/LX27 Gen 2","offer_id":43576232116286,"sku":"4RTSCPS","price":50.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTSCPSolarCableProtector2.jpg?v=1774138450"},{"product_id":"rooftop-tent-hd-hinge-set-lx27","title":"Rooftop Tent HD Hinge Set -LX27","description":"\u003ch3\u003eRooftop Tent HD Hinge Set – LX27\u003c\/h3\u003e\n\u003cp\u003eThe LX27's clamshell pivots on three heavy-duty hinges. If one is bent or worn, the shell can bind as it opens or close out of square and stop sealing. This set replaces all three with \u003cstrong\u003egenuine stainless steel hinges\u003c\/strong\u003e made to the LX27's geometry.\u003c\/p\u003e\n\u003ch4\u003eWhy fit the genuine hinges\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe pivot points match the original, so the gas struts lift the shell smoothly.\u003c\/li\u003e\n\u003cli\u003eThe shell closes square onto the automotive-grade rubber seals, keeping the tent dust free and watertight.\u003c\/li\u003e\n\u003cli\u003eThey bolt onto the factory mounting points with no drilling or modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the AX27, TX27, TX27 MAX and DX27, see the \u003ca href=\"\/products\/rooftop-tent-hd-hinge-set\"\u003eRooftop Tent HD Hinge Set – Large\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: three heavy-duty hinges\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, black and red powder coat\u003c\/li\u003e\n\u003cli\u003eFits: LX27 Gen 1 and LX27 Gen 2\u003c\/li\u003e\n\u003cli\u003eFitting: direct replacement on the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41668004118590,"sku":"4RTTHDHSS","price":215.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTTHSS_Rooftop_Tent_Hinge_Set_LX27_2.jpg?v=1774137635"},{"product_id":"rooftop-tent-handle","title":"Rooftop Tent Handle","description":"\u003ch3\u003eRooftop Tent Handle\u003c\/h3\u003e\n\u003cp\u003eThis is exactly the same heavy-duty handle that comes on Bush Company rooftop tents. Replace a damaged one, restore a model plate, or mount an extra handle to the \u003cstrong\u003eside of the tent\u003c\/strong\u003e, where it gives you a solid handhold while you load and unload gear on the tent's roof.\u003c\/p\u003e\n\u003ch4\u003eChoose your version\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAX27\u003c\/strong\u003e with AX27 model plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLX27\u003c\/strong\u003e with LX27 model plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTX27\u003c\/strong\u003e with TX27 model plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTX27 MAX\u003c\/strong\u003e with TX27 MAX model plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneric\u003c\/strong\u003e, no model plate: fits the AX27, DX27, TX27 and TX27 MAX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitting\u003c\/h4\u003e\n\u003cp\u003eThe handle bolts into the tent's side mounting channels with the supplied M8 stainless steel bolts. There's no drilling or modification.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold as: single handle\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, powder-coat finish\u003c\/li\u003e\n\u003cli\u003eFitting: M8 stainless steel bolts into the tent's side channels\u003c\/li\u003e\n\u003cli\u003eVersions: AX27, LX27, TX27 and TX27 MAX with model plate; generic without plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Fits AX27 Tent inc. Model Plate","offer_id":42392158404670,"sku":"4RTTHAX","price":80.0,"currency_code":"AUD","in_stock":true},{"title":"Fits LX27 Tent inc. Model Plate","offer_id":42544672571454,"sku":"4RTTHL","price":80.0,"currency_code":"AUD","in_stock":true},{"title":"Fits TX27 Tent inc. Model Plate","offer_id":42544672604222,"sku":"4RTTHTX","price":80.0,"currency_code":"AUD","in_stock":true},{"title":"Fits TX27 MAX Tent inc. Model Plate","offer_id":42544672636990,"sku":"4RTTHTXM","price":80.0,"currency_code":"AUD","in_stock":false},{"title":"Generic - Fits AX27 DX27 TX27 and TX27 MAX","offer_id":41707539464254,"sku":"4RTTHA","price":80.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTTHAX_Rooftop_Tent_AX27_Handle_Kit_inc._model_plate.jpg?v=1768348882"},{"product_id":"load-bar-set-1200mm","title":"Load Bar Set 1200mm","description":"\u003ch3\u003eLoad Bar Set 1200mm for canopy roofs\u003c\/h3\u003e\n\u003cp\u003eA pair of low-profile 1200mm load bars for mounting accessories on a canopy roof. They're made for \u003ca href=\"\/collections\/alloy-canopies\"\u003eCapRax by Rhinoman\u003c\/a\u003e Xpedition and Xtreme canopies, and suit any canopy with suitable mounting channels.\u003c\/p\u003e\n\u003ch4\u003eWhat they're for\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003esolar panels and roof storage\u003c\/li\u003e\n\u003cli\u003erecovery gear and other accessories on the T-slot channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach bar is rated to \u003cstrong\u003e50kg\u003c\/strong\u003e. Mounting a rooftop tent on your canopy? Use the \u003ca href=\"\/products\/heavy-duty-load-bar\"\u003eHeavy Duty Load Bar\u003c\/a\u003e (rated to 150kg) or the \u003ca href=\"\/products\/z-rail-bracket-set\"\u003eZ-Rail Bracket Set\u003c\/a\u003e; they're the right solution for a tent.\u003c\/p\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle. CapRax canopies are rated to 250kg dynamic and 500kg static.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two load bars with end caps and support brackets\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per bar\u003c\/li\u003e\n\u003cli\u003eBar: 4mm aluminium, 1200mm long × 50mm wide × 25mm high, black powder coat\u003c\/li\u003e\n\u003cli\u003eEnd caps and support brackets: steel, black powder coat\u003c\/li\u003e\n\u003cli\u003eFixings: stainless steel M8 bolts and washers\u003c\/li\u003e\n\u003cli\u003eMounting: T-slot channels for accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"CapRax","offers":[{"title":"Default Title","offer_id":41716808187966,"sku":"4RRLB1200","price":420.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RRLB1200LoadBarSet1200mm.jpg?v=1759364862"},{"product_id":"sirocco-12v-fan","title":"Sirocco II Fan","description":"\u003ch3\u003eSirocco II Fan: airflow for warm nights in the tent\u003c\/h3\u003e\n\u003cp\u003eOn a still, humid night, a fan makes the difference between sleeping and lying awake. The Sirocco II, made by Caframo, moves up to \u003cstrong\u003e185 CFM (314m³\/h)\u003c\/strong\u003e on high while drawing just \u003cstrong\u003e0.35A at 12V\u003c\/strong\u003e, and about 54dB, so it can run all night off your house battery.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional airflow:\u003c\/strong\u003e the gimballed head swivels to aim the air across the bed or towards the door.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree speeds:\u003c\/strong\u003e 1200, 1500 and 1800 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-off timers:\u003c\/strong\u003e 3, 6, 9 or 12 hours, so it switches itself off once the night cools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12\/24V auto-sensing:\u003c\/strong\u003e works on either system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStows flat:\u003c\/strong\u003e folds to 97mm deep, with 178mm FingerSafe™ blades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCables for your tent\u003c\/h4\u003e\n\u003cp\u003eWe supply the fan with custom cables to connect it to the 12V sockets in our tents:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea 2.5m lead with a 12V plug and socket, which runs neatly up the zippered cable channels inside the tent roof\u003c\/li\u003e\n\u003cli\u003ean 860mm lead with a 12V plug that connects the 2.5m lead to the fan's terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMounting it\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e and DX27: the \u003ca href=\"\/products\/sirocco-12v-fan-bracket\"\u003eSirocco 12V Fan Bracket\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eLX27 Gen 1 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e: the \u003ca href=\"\/products\/sirocco-12v-fan-mount-plate\"\u003eSirocco 12V Fan Mount Plate\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTake the fan off its bracket before you close the tent; the bracket stays in place.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 12\/24V DC, auto-sensing\u003c\/li\u003e\n\u003cli\u003eAirflow: up to 185 CFM (314m³\/h)\u003c\/li\u003e\n\u003cli\u003eNoise: about 54dB on high\u003c\/li\u003e\n\u003cli\u003eSpeeds: 1200, 1500 and 1800 RPM\u003c\/li\u003e\n\u003cli\u003eCurrent draw at 12V: 0.12A low, 0.35A high (24V: 0.06A low, 0.21A high)\u003c\/li\u003e\n\u003cli\u003eTimers: 3, 6, 9 and 12 hours\u003c\/li\u003e\n\u003cli\u003eBlades: 178mm FingerSafe™\u003c\/li\u003e\n\u003cli\u003eStowed depth: 97mm\u003c\/li\u003e\n\u003cli\u003eIncluded: 2.5m lead and 860mm lead with 12V plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41770382950462,"sku":"TRA-7010CA-BBX","price":231.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/2908350315.jpg?v=1748260192"},{"product_id":"compact-telescopic-ladder","title":"Compact Telescopic Ladder - Angled Steps","description":"\u003ch3\u003eCompact Telescopic Ladder: lighter, slimmer, still angled steps\u003c\/h3\u003e\n\u003cp\u003eThe Compact Telescopic Ladder is the ladder supplied with our lightweight LX27 Gen 1 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e. It keeps the comfort of \u003cstrong\u003eangled steps\u003c\/strong\u003e, at a slimmer 45mm, and weighs just 7.6kg, so it suits builds where weight and storage space count.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine angled steps\u003c\/strong\u003e, 45mm wide, at 300mm spacing, to set the height for your vehicle and the ground you're on.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEach step locks individually.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach:\u003c\/strong\u003e extends to 2.6m; collapses to 76cm (83.5cm with the mount plate fitted).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking load limit:\u003c\/strong\u003e 150kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanvas storage bag\u003c\/strong\u003e included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitting it to your tent\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWhen it comes with a tent, the ladder has the mount plate already fitted. A spare ladder bought on its own needs the \u003ca href=\"\/products\/ladder-mount-plate-deluxe-or-compact-ladder\"\u003eLadder Mount Plate\u003c\/a\u003e (sold separately). Plates from our older standard ladder don't fit the 45mm steps.\u003c\/li\u003e\n\u003cli\u003eThe plate hooks onto the \u003ca href=\"\/products\/ladder-mount-bracket\"\u003eLadder Mount Bracket\u003c\/a\u003e on the tent.\u003c\/li\u003e\n\u003cli\u003eFor wide canopies or rear bars on the LX27, the \u003ca href=\"\/products\/wide-ladder-mount-bracket-lx27\"\u003eWide Ladder Mount Bracket – LX27\u003c\/a\u003e stands the ladder further out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant wider steps? The \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/deluxe-telescopic-ladder\"\u003eDeluxe Telescopic Ladder\u003c\/a\u003e has 75mm angled steps.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtended length: 2.6m\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 76cm; 83.5cm with the mount plate\u003c\/li\u003e\n\u003cli\u003eSteps: nine, angled, 45mm wide, 300mm spacing\u003c\/li\u003e\n\u003cli\u003eWorking load limit: 150kg\u003c\/li\u003e\n\u003cli\u003eWeight: 7.6kg without the mount plate\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium alloy, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: canvas storage bag (mount plate sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41773955285054,"sku":"4RTCL","price":250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Compact_Ladder_4.jpg?v=1759793566"},{"product_id":"storm-strap-set","title":"Storm Strap Set","description":"\u003ch3\u003eStorm Strap Set for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eWhen the weather turns, a slack rainfly flaps, lets rain blow under it and keeps you awake. The Storm Strap Set \u003cstrong\u003eadds tension and fall\u003c\/strong\u003e to the rainfly on Bush Company rooftop tents, so it sits tight and sheds water.\u003c\/p\u003e\n\u003ch4\u003eHow it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHook one end through the \u003cstrong\u003epadlock hole in a latch on the base of the tent\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eClip the other end to the toggles built into the rainfly.\u003c\/li\u003e\n\u003cli\u003eAdjust the strap to set the tension for the conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold as a pair, they're the same storm straps supplied with the \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e, and they suit all Bush Company rooftop tents.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold as: pair\u003c\/li\u003e\n\u003cli\u003eFitting: hooks through the base latch padlock hole; clips to the rainfly toggles\u003c\/li\u003e\n\u003cli\u003eAdjustable tension\u003c\/li\u003e\n\u003cli\u003eSuits: all Bush Company rooftop tents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41804730433598,"sku":"4RTSSS","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/StormStrapSet2.jpg?v=1750090509"},{"product_id":"ladder-mount-plate-deluxe-or-compact-ladder","title":"Ladder Mount Plate - Deluxe or Compact Ladder","description":"\u003ch3\u003eLadder Mount Plate for the Deluxe or Compact ladder\u003c\/h3\u003e\n\u003cp\u003eThis plate is what connects your telescopic ladder to the tent. It bolts to the top step of the \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/deluxe-telescopic-ladder\"\u003eDeluxe\u003c\/a\u003e or \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/compact-telescopic-ladder\"\u003eCompact\u003c\/a\u003e Telescopic Ladder through pre-drilled holes, then hooks onto the \u003ca href=\"\/products\/ladder-mount-bracket\"\u003eLadder Mount Bracket\u003c\/a\u003e on the tent.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel with a black powder-coat finish.\u003c\/li\u003e\n\u003cli\u003eA \u003cstrong\u003erubber strip along the top edge\u003c\/strong\u003e reduces wear and scratching on the tent's ladder bracket.\u003c\/li\u003e\n\u003cli\u003eHolds the ladder steady while you climb, including on uneven ground.\u003c\/li\u003e\n\u003cli\u003eHardware included; basic tools needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits the Deluxe and Compact Telescopic Ladders only. It does \u003cstrong\u003enot\u003c\/strong\u003e fit the older Standard Telescopic Ladder.\u003c\/li\u003e\n\u003cli\u003eNeeds the double-bolt \u003ca href=\"\/products\/ladder-mount-bracket\"\u003eLadder Mount Bracket\u003c\/a\u003e on the tent, or the \u003ca href=\"\/products\/wide-ladder-mount-bracket\"\u003eWide Ladder Mount Bracket\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eTop edge: rubber protective strip\u003c\/li\u003e\n\u003cli\u003eFits: Deluxe and Compact Telescopic Ladders\u003c\/li\u003e\n\u003cli\u003eHardware: included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41804798427198,"sku":"4RTLPDS","price":62.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/Compact_Ladder_3.jpg?v=1750034723"},{"product_id":"awning-to-tent-bracket-4-piece-ax27-tx27-max-dx27","title":"Awning To Tent Bracket 4 Piece - AX27, TX27\/MAX, DX27","description":"\u003ch3\u003eAwning To Tent Bracket 4 Piece for the AX27, TX27, TX27 MAX and DX27\u003c\/h3\u003e\n\u003cp\u003eThis bracket set mounts your awning straight onto the \u003ca href=\"\/products\/ax27-clamshell-rooftop-tent\"\u003eAX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e, \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e or DX27 rooftop tent, so the awning travels with the tent and the rack stays free. It bolts into the tent's Ezi-Slot channels: no drilling, no spacers, nothing to modify.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the set\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo main mounting brackets\u003c\/strong\u003e that carry the awning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo reinforced corner plates\u003c\/strong\u003e that take the twisting load a 270° awning puts on its mounts when it opens and in wind gusts.\u003c\/li\u003e\n\u003cli\u003eStainless steel bolts and nyloc nuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitting notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMount the awning on the \u003cstrong\u003eleft or right\u003c\/strong\u003e side of the tent.\u003c\/li\u003e\n\u003cli\u003eRated for awnings up to \u003cstrong\u003e40kg\u003c\/strong\u003e, so it carries any Bush Company awning: the \u003ca href=\"\/products\/270-xt-max-awning-mk2\"\u003e270 XT MAX Awning Mk2\u003c\/a\u003e, \u003ca href=\"\/products\/270-xt-awning-mk2\"\u003e270 XT Awning Mk2\u003c\/a\u003e and \u003ca href=\"\/products\/180-xt-max-awning\"\u003e180 XT MAX\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eWith the \u003cstrong\u003e270 XT Awning Mk2\u003c\/strong\u003e, install only the corner piece at the hinged end of the awning.\u003c\/li\u003e\n\u003cli\u003eIf your vehicle means the awning bracket has to point upwards, add the \u003ca href=\"\/products\/spring-rod-adapter\"\u003eSpring Rod Adapter\u003c\/a\u003e. It moves the rainfly pole clear of the awning, so you don't have to bend a dog-leg into the pole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eContents: two main brackets, two corner plates, stainless steel bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eRating: awnings up to 40kg\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot channels, left or right side\u003c\/li\u003e\n\u003cli\u003eFits: AX27, TX27, TX27 MAX and DX27\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the LX27, see the \u003ca href=\"\/products\/awning-to-tent-bracket-4-piece\"\u003eAwning To Tent Bracket 4 Piece – LX27\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41820346875966,"sku":"4RTAABH","price":357.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTAABH-AwningToTentBracket4Piece--AX27_TX27_MAX_DX274.jpg?v=1750933605"},{"product_id":"wide-ladder-mount-bracket-lx27","title":"Wide Ladder Mount Bracket - LX27","description":"\u003ch3\u003eWide Ladder Mount Bracket for the LX27\u003c\/h3\u003e\n\u003cp\u003eIf a wide canopy or rear bar stops the ladder hanging straight from your LX27, this bracket moves the ladder's hook point \u003cstrong\u003e70mm further out\u003c\/strong\u003e so it clears.\u003c\/p\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBolts into the LX27's Ezi-Slot channels with the supplied stainless steel M8 bolts and nyloc nuts. No drilling.\u003c\/li\u003e\n\u003cli\u003eTakes the \u003ca href=\"\/products\/ladder-mount-plate-deluxe-or-compact-ladder\"\u003eLadder Mount Plate\u003c\/a\u003e on the \u003ca href=\"\/collections\/rooftop-tent-spare-parts\/products\/compact-telescopic-ladder\"\u003eCompact Telescopic Ladder\u003c\/a\u003e supplied with the \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the AX27, TX27 and TX27 MAX, use the \u003ca href=\"\/products\/wide-ladder-mount-bracket\"\u003eWide Ladder Mount Bracket\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtra clearance: 70mm\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel M8 bolts and nyloc nuts\u003c\/li\u003e\n\u003cli\u003eFits: LX27 and LX27 Gen 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":41839175860286,"sku":"4RTWLMBLX","price":126.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTWLMBLX-LadderMountBracketWide70mm-LX27-2boltsforladder2.png?v=1752099320"},{"product_id":"gas-strut-replacements","title":"Gas Strut Replacements","description":"\u003ch3\u003eReplacement Gas Struts for Bush Company rooftop tents\u003c\/h3\u003e\n\u003cp\u003eThe gas struts do the lifting when you open your tent. Over time, and especially in cold weather, they lose pressure: the lid gets heavier to lift, or won't hold itself fully open. A new pair, rated for your tent, brings back the smooth, controlled lift.\u003c\/p\u003e\n\u003ch4\u003eChoose your tent\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAX27:\u003c\/strong\u003e one pair, 530mm, 650N.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLX27 Gen 1 and \u003ca href=\"\/products\/lx27-gen-2-lightweight-rooftop-tent\"\u003eLX27 Gen 2\u003c\/a\u003e:\u003c\/strong\u003e one pair, 530mm, 600N.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDX27:\u003c\/strong\u003e one pair, 490mm, 650N.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTX27 and TX27 MAX:\u003c\/strong\u003e the double-action roof has struts in the top and bottom sections. The \u003cstrong\u003ebottom-section pair\u003c\/strong\u003e (530mm, 800N) fits both tents; the \u003cstrong\u003etop-section pairs\u003c\/strong\u003e are different for the \u003ca href=\"\/products\/tx27-hardshell-rooftop-tent\"\u003eTX27\u003c\/a\u003e (490mm, 350N) and the \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e (490mm, 400N).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitting tips\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplace struts in pairs, so both sides lift evenly and the hinges aren't twisted.\u003c\/li\u003e\n\u003cli\u003eSupport the lid securely before removing the old struts.\u003c\/li\u003e\n\u003cli\u003eThe new struts fit the original mounting points and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold as: pair\u003c\/li\u003e\n\u003cli\u003eAX27: 530mm, 650N\u003c\/li\u003e\n\u003cli\u003eLX27 Gen 1 and Gen 2: 530mm, 600N\u003c\/li\u003e\n\u003cli\u003eDX27: 490mm, 650N\u003c\/li\u003e\n\u003cli\u003eTX27 top section: 490mm, 350N\u003c\/li\u003e\n\u003cli\u003eTX27 MAX top section: 490mm, 400N\u003c\/li\u003e\n\u003cli\u003eTX27 and TX27 MAX bottom section: 530mm, 800N\u003c\/li\u003e\n\u003cli\u003eFitting: direct replacement on the original mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"AX27 Gas Struts - Pair","offer_id":42229383364670,"sku":"4RTGS53-65","price":153.0,"currency_code":"AUD","in_stock":true},{"title":"LX27 Gas Struts - Pair","offer_id":42229383397438,"sku":"4RTGS53-60","price":153.0,"currency_code":"AUD","in_stock":true},{"title":"TX27 Top Section Gas Struts - Pair","offer_id":42229383430206,"sku":"4RTGS49-35","price":87.0,"currency_code":"AUD","in_stock":true},{"title":"TX27 MAX Top Section Gas Struts - Pair","offer_id":42229383495742,"sku":"4RTGS49-40","price":131.0,"currency_code":"AUD","in_stock":true},{"title":"TX27 or TX27 MAX Bottom Section Gas Struts - Pair","offer_id":42229383528510,"sku":"4RTGS53-80","price":87.0,"currency_code":"AUD","in_stock":true},{"title":"DX27 Gas Struts - Pair","offer_id":42257947820094,"sku":"4RTGS49-65","price":132.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTGS53-60_K4153_Gas_Strut_-_600N_Set_-_LX27_Struts.jpg?v=1773316598"},{"product_id":"rooftop-tent-dead-bolt-bracket","title":"Rooftop Tent Dead Bolt Bracket","description":"\u003ch3\u003eRooftop Tent Dead Bolt Bracket: extra security for the drive\u003c\/h3\u003e\n\u003cp\u003eOur tents close on custom-made, heavy-duty stainless steel over-centre latches. The Dead Bolt Bracket adds a \u003cstrong\u003emechanical stop behind them\u003c\/strong\u003e, so even if you forget to fully secure a latch, the tent can't open by itself while you're driving.\u003c\/p\u003e\n\u003ch4\u003eWhen it's required\u003c\/h4\u003e\n\u003cp\u003eYou can fit a Bush Company tent the usual way, with the open end at the rear of the vehicle, or in reverse, with the open end facing forward and the ladder secured to a roof rack on the cab. \u003cstrong\u003eIf you fit it in reverse, the Dead Bolt Bracket is required\u003c\/strong\u003e as a safety feature, in case the latches haven't been secured properly. For a normal installation it's an optional extra.\u003c\/p\u003e\n\u003ch4\u003eHow it fits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe top and bottom sections bolt into the tent's Ezi-Slot channels, so there's no drilling and nothing to modify.\u003c\/li\u003e\n\u003cli\u003eIt works alongside other Ezi-Slot accessories such as awning brackets, ladder brackets and recovery track mounts.\u003c\/li\u003e\n\u003cli\u003eMade from stainless steel with a black powder-coat finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits the AX27, TX27, TX27 MAX and DX27. It doesn't fit the LX27.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFunction: mechanical lock that stops the tent opening if the latches aren't fully secured\u003c\/li\u003e\n\u003cli\u003eRequired for: reversed installations (open end facing forward)\u003c\/li\u003e\n\u003cli\u003eMounting: Ezi-Slot channels, no drilling\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel with a black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eFits: AX27, TX27, TX27 MAX and DX27 (not the LX27)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":42233917800510,"sku":"4RTDBB","price":165.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/4RTDBBRooftopTentDeadBoltBracket-complete2.jpg?v=1763326190"},{"product_id":"mattress-and-cover-tx27-max","title":"Mattress and Cover TX27 MAX","description":"\u003ch3\u003eMattress and Cover for the TX27 MAX\u003c\/h3\u003e\n\u003cp\u003eThis is the factory mattress for the wider \u003ca href=\"\/products\/tx27-max-hardshell-rooftop-tent\"\u003eTX27 MAX\u003c\/a\u003e, sized for two adults and a child. Use it to replace a worn mattress or as a spare.\u003c\/p\u003e\n\u003ch4\u003eComfort that lasts\u003c\/h4\u003e\n\u003cp\u003eThe 80mm mattress has \u003cstrong\u003e40mm of medium-density foam on top for comfort, over a 40mm high-density foam base\u003c\/strong\u003e that gives a firm foundation and resists bottoming out.\u003c\/p\u003e\n\u003ch4\u003eFit and care\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCut to the TX27 MAX at \u003cstrong\u003e2.13m long × 1.45m wide\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThe removable zippered ripstop canvas cover is mould and abrasion resistant and protects the foam from dust, sand and sweat. Unzip it and machine wash it when it needs it.\u003c\/li\u003e\n\u003cli\u003eIt stays inside the closed tent with your bedding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the AX27, TX27 and DX27, see the \u003ca href=\"\/products\/mattress-and-cover\"\u003eMattress and Cover\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 2.13m long × 1.45m wide × 80mm thick\u003c\/li\u003e\n\u003cli\u003eFoam: 40mm medium-density top layer over a 40mm high-density base\u003c\/li\u003e\n\u003cli\u003eWeight: 9kg\u003c\/li\u003e\n\u003cli\u003eCover: removable, zippered ripstop canvas; machine washable; mould and abrasion resistant\u003c\/li\u003e\n\u003cli\u003eFits: TX27 MAX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our \u003ca href=\"\/pages\/find-a-stockist\"\u003estockists\u003c\/a\u003e Australia wide.\u003c\/p\u003e","brand":"The Bush Company","offers":[{"title":"Default Title","offer_id":42262713729086,"sku":"4RTMM","price":425.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/8719\/2126\/files\/AX27-Clamshell-Rooftop-Tent-mattress-foam_de95df28-5c13-49fa-9775-f1ccd657a9e0.jpg?v=1748155710"}],"url":"https:\/\/thebushcompany.com\/collections\/rooftop-tent-accessories-spares-and-fitment.oembed?page=5","provider":"The Bush Company","version":"1.0","type":"link"}